通用傳感器QS30系列 *代理邦納BANNER 通用傳感器QS30系列

邦納BANNER 通用傳感器

QS30 直角螺紋安裝或側面安裝傳感器 

因型號眾多，受網頁環境以及內容所限，難以在此一一介紹，更多的產品選型，以及產品資料和詳細技術參數，請旺旺客服或登錄納鐵福www.natifeat。。ｃｏｍ下載產品樣本，亦可致電我司索取，。

應用示意圖（供參考）：

透明瓶偵測計數
檢測和計數透明的瓶子在醫藥業應用是一個困難的挑戰。用傳統光電傳感器感應的光線也許會通過透明材料，或發散的光可能會被反射，造成不可靠的計數結果。
使用超音波傳感器可以使用偵測透明的對象，但超音波方案可能無法有一個快速的響應時間，且超音波波幅會太大, 以至于無法測出瓶之間的空隙。此應用需要可靠地計數透明的瓶子。

***選型使用描述：***
World-Beam QS30 透明物傳感器能可靠地偵測和計數。QS30特殊的光學設計能調整控制傳感器所發射的光到反射板。 穩定和光學信道允許傳感器的微型控制器測出微小的變化。另外，當他們迅速通過輸送帶，快速的500微秒響應時間使傳感器能偵測到和計算數量。
QS30ELVC防護等級的是IP67和PW12。 

Clear Container Detection

Plastic container detection is challenging because containers are clear and can have ridges, which may attenuate light differently and can be difficult to detect accuray. In order to count these containers as they move down the conveyor, it is important to have a dynamic sensor that can sense clear or transparent items and do so quickly and accuray.

Description
The QS30ELVC retroreflective sensor is the ideal solution for detection of clear targets because it has an 8% threshold for clear object detection, which allows a clear object to be detected as long as it attenuates at least 8% of the light passing through it. The sensor has a minimum range of 100 mm, which is great for small conveyors and limited spaces, with a maximum range of 2 m.

The configuration and setup of Banner’s QS30ELVC is quick and easy with a TEACH mode that learns the amount of light reflected back as the clear condition with just a simple touch of a button. The sensor has an automatic compensation algorithm that compensates for dust and contamination on the sensor/reflector for consistent and reliable detection that reduces down time. The QS30ELVC also compensates for ambient temperature changes.

The QS30ELVC has a 500 microsecond response time to accuray detect clear containers in high speed counting applications, and the reflector is available in a square or smaller rectangular shape to meet various user needs. 

飲料盒檢測
確認果汁盒的有無。

***選型使用描述：***
當果汁包裝盒從傳送帶上通過時,WORLD-BEAM QS30定區域式傳感器檢測包裝盒的有無,而忽略顏色的變化。

螺紋孔的檢測
遠距離確認部件上的孔是否是螺紋孔
***選型使用描述：***
從800mm的距離，采用WORLD-BEAM QS30激光傳感器檢測部件上的孔是否有螺紋。 

QS30系列的傳感器從側面測量木板的平整度
檢測木板是否扭曲變形
***選型使用描述：***
當木板在傳送帶上通過時,高精度WORLD-BEAM雷射光QS30傳感器可以檢測出由于扭曲變形而比正常高的木板.偏振反射板安裝在傳感器的對面,這樣可以不用同時在傳送帶的兩側安裝。