119-07可移印，高介電強度，油墨/涂料

119-07可移印，高介電強度，油墨/涂料

說明：119-07是一種黑色，可移印，單組分，高介電強度，環氧油墨和

涂層。本產品對卡普頓、聚酯薄膜、鋁、fr-4板、玻璃和

其他基材的種類。與傳統的電介質材料不同，這種產品對

磨損、劃傷和熱老化。119-07的申請包括但不限于

電氣和電子設備用絕緣強度涂層。119-07設計用于在

輪廓曲面。

典型特性：

粘度（cps）10000-12000

介電強度（伏特/0.001“）2500

介電常數（100Hz）4.0

體積電阻率（歐姆厘米）1 x 1016

鉛筆硬度6h（?。?/p>

玻璃化轉變溫度（℃）160

水解穩定性優異

建議的處理和固化：119-07已準備好按供應使用。在使用之前，一定要

重新掛起填料?？赏ㄟ^添加少量CMI稀釋劑113來實現進一步稀釋-

39歲。對于大多數應用，在125℃下固化1小時或在150℃下固化30分鐘可獲得性能。

通過在125°C至

185°C。建議終用戶通過實驗確定適合個人的溫度和時間

應用。

貯存期：25℃下保存2個月；或-10℃下保存6個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。

避免長時間接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

119-07可移印，高介電強度，油墨/涂料

119-07
PAD-PRINTABLE, HIGH DIELECTRIC STRENGTH, INK / COATING
DESCRIPTION: 119-07 is a black, pad-printable, one component, high dielectric strength, epoxy ink and
coating. This product features excellent adhesion to Kapton, Mylar, aluminum, FR-4 boards, glass and a
variety of other substrates. Unlike conventional dielectric materials, this product is very resistant to
abrasion, scratching, and thermal aging. Applications for 119-07 include, but are not limited to, high
dielectric strength coatings for electrical and electronic devices. 119-07 is designed for pad printing onto
contoured surfaces.
TYPICAL PROPERTIES:
Viscosity (cps) 10,000-12,000
Dielectric Strength (Volts/0.001") 2500
Dielectric Constant (100Hz) 4.0
Volume Resistivity (ohm-cm) 1 x 1016
Pencil Hardness 6H (min.)
Glass Transition Temperature (°C) 160
Hydrolytic Stability Excellent

SUGGESTED HANDLING AND CURING: 119-07 is ready to use as supplied. Prior to using, be certain to
re-suspend filler. Further thinning may be accomplished by adding small amounts of CMI Thinner # 113-
39. Best properties, for most applications, result when cured for 1 hour at 125°C, or 30 minutes at 150°C.
Good properties are obtained on a variety of substrates by curing at temperatures ranging from 125°C to
185°C. End user is advised to experimentally determine temperature and time best suited for individual
applications.
STORAGE: Shelf life: 2 months at 25°C; or 6 months at -10°C.
SAFETY AND HANDLING: Use with adequate ventilation. Keep away from sparks and open flames.
Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.