芯片實驗室處理平臺/細胞培養箱

芯片實驗室處理平臺/細胞培養箱

ChipShop提供多種顯微鏡幻燈片格式的微流控設備它們都定義了mini-luer液體接口的共同位置，使得與芯片實驗室處理平臺的連接變得容易。當需要?jiǎng)?chuàng)建1/16“OD剛性（PTFE，PEEK…）連接而無泄漏時，此芯片固定器非常方便。

芯片實驗室操作平臺可以放在顯微鏡下進行現場觀察。

容易連接

操作平臺采用ChipShop流行的Mini-Luer接口，設計用于三種微流控接口配置：兩種接口配置，在微流控芯片較短的一側具有流體接口，另一種在較長的一側具有流體接口以4.5毫米的間距定位開口，與384井微量滴定板的間距*匹配。

2 x 4芯片模式2 x 16芯片模式4 x 8芯片模式

2 x 4圖案2 x 16圖案2 x 8圖案

提供兩種版本的芯片實驗室處理平臺，每個平臺都有或沒有加熱元件：

聚合物芯片的標準處理平臺（PC、PMMA、COC、COP等）該連接是通過芯片固定器內的特殊連接器進行的，以確保與芯片的mini Luer端口的無泄漏連接。

通孔玻璃芯片的特殊處理平臺：由于將不帶連接器的玻璃芯片連接到流體系統可能會很繁瑣，因此這種芯片固定器可以很容易地創建到通孔接口的連接。

連接到您的流體設置是通過1/16“OD剛性（聚四氟乙烯，聚醚醚酮，…）管的防漏連接器。

以高精度加熱芯片上的實驗室

在每個處理平臺版本上，您可以添加加熱元件以控制溫度，例如用于酶分析或細胞培養。舞臺的加熱元件與控制器和電源電連接。

帶加熱元件的芯片實驗室培養箱

芯片實驗室處理平臺/細胞培養箱

ChipShop offers a large variety of microfluidic devices in the microscopy slide format. All of them have defined positions of the mini Luer liquid interfaces in common, making the connection to the Lab-on-a-Chip Handling Platform easy. This chip holder is very handy when needing to create 1/16" OD rigid (PTFE, PEEK...) connections without leakage.

The Lab-on-a-chip Handling Platform can be placed under a microscope for live observation.

Easy connection

The Handling Platform is designed for three microfluidic interface configurations using ChipShop's popular Mini Luer interfaces: two interface configurations with the fluidic interface at the shorter sides of the microfluidic chip and one at the longer side, addressing openings with a 4.5 mm spacing exactly matching the spacing of a 384 well microtiter plate.

2 x 4 pattern	2 x 16 pattern	2 x 8 pattern

Two versions of the Lab-on-a-Chip Handling Platform are available, each with or without a heating element:

• The standard handling platform for polymer chips (in PC, PMMA, COC, COP,...). The connection is made through special connectors within the chip holder to ensure leak-free connections with the mini Luer ports of the chip.
• The special handling platform for thru-hole glass chips: because connecting a glass chip without connectors to your fluidic system can be tedious, this chip holder makes it easy to create a connection to thru-hole interfaces.

Connection to your fluidic setup is made through leak-proof connectors to 1/16" OD rigid (PTFE, PEEK,...) tubing.

Heat your lab-on-a-chip with a high precision

On each of the handling platform versions, you can add a heating element to precisely control the temperature e.g. for enzyme assays or cell culture. The heating element of the stage is electrically connected to a controller and a power supply.