官方微信|手機版

產品展廳

產品求購企業資訊會展

發布詢價單

化工儀器網>產品展廳>分析儀器>數據處理設備>實驗室信息管理系統(LIMS)>PM5786 Fluke PM5786 脈沖信號發生器

分享
舉報 評價

PM5786 Fluke PM5786 脈沖信號發生器

具體成交價以合同協議為準
  • 公司名稱 上海索宜電子科技有限公司
  • 品牌
  • 型號 PM5786
  • 產地 美國
  • 廠商性質 生產廠家
  • 更新時間 2017/8/31 20:15:37
  • 訪問次數 741

聯系我們時請說明是化工儀器網上看到的信息，謝謝!


上海索宜電子科技有限公司本公司秉持以制造*的安全性、操作性、耐用性之優質産品爲目標。電源系統在制造過程中,*符合品質標準及國家工業標準,并堅信以高品質、高耐用度、高安全性爲設計著眼點,不論高科技精密設備代理商、經銷商、電機技師、廠務設備工程師、及海內外設廠之規劃者,均會*認同及采用以品質、性能、制造、銷售、售后服務及功能上傲視群儕的電源産品,來保障其設備穩定、干凈、安全的供電品質。電力電源系統我們主力産品之一，我們的專業設計人員爲達成Z高目標、*,不斷奉獻智能與心力,爲您提供日夜活躍運轉于工廠的Z佳電力品質。     
    營業范圍 本公司一直致力于交流電壓穩定器、變壓器、不斷電系統、變頻電源、大功率開關電源，線性直流穩壓電源、電力諧波濾波改善設備等各類型電源系統設備之研究、開發、設計、制造和行銷,以提供客戶完整的電力解決方案。公司具有充足的儀器存貨,保證廣大客戶的多樣化選擇和需求.公司遵循“信譽*服務*、質量*用戶*”的原則,為廣大客戶提供國內外優質產品和周到的售后服務,歡迎廣大新老客戶來電來函咨詢索取資料.

本公司一直致力于交直流電壓穩定器,變壓器,ups不斷電系統,變頻器,電力諧波濾波改善設備等各類型電源系統設備之研究、開發、設計、制造和行銷,以提供客戶完整的電力解決方案。

特點
·脈沖頻率范圍：1Hz~125MHz
·2ns到100ms的上升和下降時間
·時間設置錯誤指示
·0.2~5V幅度變成50W
·+脈沖和-脈沖的雙通道同時輸出
·完整的外部控制設備
·LED糾正觸發水平的顯示
技術指標
Time parameters
Pulse repetition period:8 ns to ls1 Hz to 125 MHz
Pulse delay:8 ns to 100ms
Pulse duration :3.5ns to 100ms
Transition times:2ns ±10% to >100ms ,corresponding to 10%90% ofpulse amblitude,For ECL testinge,the minimum transition time is 1.4ns correspondingto 20%80% levels.
Jittter:0.1% of setting±50ps
Main pulse characteristics
Outputs:2 channesls,AB
Pulse amplitude: 0.2 V to 5V at ZL=50Ω,double amplitude at open output,within the range±6V
DC offset:-2.5V to +2.5V at ZΔ=50Ω±5V at open output
Max output voltage:Pulse amplitude plus dc offset is max±6V.Maximum 10Vopen output amplitude can be achieved provided the signal is in the range±6V
Waveform aberrations:Less than 5%+10mV ,less than 10% for transition times2 to 5ns
Source resistance:50Ω±5%
Source impedance:500Ω±10%
Output protection:Against short-and open circuittransients3000mA/us,600mA/1sec
Pulse modes:Single pulsedelayabledouble pulse or symmetrical pulse 50%±1%1Hzto MHz;50%±10%1MHz to 125MHznormal or complementary,switchable
Output modes
Bipolar:Simultaneously positivenegative polarity
Positive:Positive polanity,normalcomplementary
Negative:Negative polarity,normalcomplementary
External operating modes
Trigg:Externally triggered pulse repetition DC to 125 MHz or manual singleshot
Gate:Synchronous gating,external input signal startsstops the generator
Burst:PM 5768B onlyInternally generated burst with push wheel selectionof mumber of pulses 0 to 9999 started by external input signal or manualcontrol
External duration:External duration gives pulses with same duration andrepetition rate as exteranl input signal all other pulse pqrameters areset via the generator
External input
Range :DCA to 125MHz minimum pulse duration 3.5ns
Input voltage range:0.5 to 15V pp
Coupling:DC
Input impedance:1MΩ//25pF
Trigger level :-3V to +3V
Trigger slope:+and -
Trigger indicator:Tri-state LEK ,blinking for proper triggering
Max input voltage:260V rms at <440Hz,reducing to 15V pp at 125MHz
Internal clock output
Main output pulse is delayble:with respect to internal clock output,whichtherefore can be used as pre-trigger
Amplitude:+2.5V into 50Ω
Output impedance:50typical
Translition time :Approximay 1ns
Pulse duration:Symmetrical pulse,50%±1%1Hz to 1MHz 50%±10%1MHz to 125MHz
Output protection:Against short-and open circuittransients
Time setting error ineicators:Warning for erroneous settings of excessivetimes for pulse delay,pulse duration,leadingtrailing transition times,indicated with 4 LEDs
Power requirements
Line:100V,120V,220V240V rms ±10%,120VA 50 to 60Hz
Mains interference:Below VDE 0871 level BMIL-STD 461A
Safety:According to CE-regulation 73/23 EN61010-1 CAT II ,Polution Degree2
EMC:According to CE regulation 89/336:Emission according to EN 550081-1,EN55022 Class B,EN60555-2,Immunity accoreing to EN 5082-1,inclusive IEC801-2,-3,-4,-5.
Dimensionsweight
Maximum dimensions
Height:145 mm5.7in
Width:300mm11.8in
Depth:470mm18.5in
Weight:Net 9.5kg21Lb
Shipping :11.5kg25Lb
Climatic Conditions
Ambient temperature
Rated range of use:0 °to 50℃
Storagetransport:-40℃ to +70℃
Relative humidity
Rated range of use:10 to 90% RH,noncondensing
Storagetranspout:5 to 95% RH,
Barometric pressurealtitude
Rated range of use:5000m 15000 ft-53.3kN/m2
Storagetransport:15000m50000 ft-15.2dN/m2
Mechanical type-test
Vibration:According to IEC publication 68-2-6Fc
Bump:According to IEC publication 68-2-29Ec
Transport:According to Philips Standard UN-D 1400
Shock:According to MIL-T-28800
Cltmatic type-test
Steady dry heat:According to IEC publication 68-2-2Bb
Steady cold:According to IEC publication 68-2-1Ab
Cyclic dampheat:According to IEC publication 682-2Db
Standard accessories
1 manual
1 mains flex cord
1 fuse 800mA delayed action
1 fuse 1.6A delayed action

訂貨信息
Model NameProduct Description
PM 5786/002 ns Pulse Generator;excluding preset burst unit
PM 5786/002 ns Pulse Generator;including preset burst unit

Model NameAccessory or Option Description
PM 9581/0150Ω Feedthrough termination 3W
PM 9584/0250Ω T-piece matched power-splitter
PM 9585/0150Ω Feedthrough Termination,1W
PM 9588/0150Ω BNC-BNC cable set 5＊0.2m,4＊0.4m,3＊0.6m,3＊2,regular cables



化工儀器網

采購商登錄
記住賬號    找回密碼
沒有賬號？免費注冊

提示

×

*您想獲取產品的資料：

以上可多選，勾選其他，可自行輸入要求

個人信息：

溫馨提示

該企業已關閉在線交流功能