重慶高低溫沖擊試驗箱/冷熱沖擊試驗機

Vötsch – Thermal Shock Test Cabinet--Model VT 7012 S2

德國-高低溫沖擊試驗箱--型號VT 7012 S2

Performance data性能參數

Temperature range of

hot chamber熱箱溫度范圍                 from +50 °C to +220 °C

Temperature range of

cold chamber冷箱溫度范圍               from -80 °C to +70 °C

Hot or cold chamber may also be utilized as individual temperature chamber.
熱箱或冷箱分別可作為單獨溫度試驗箱使用

Temperature deviation in time

in centre of working space

工作室中心點隨時間溫度偏差              ±0.3 K to ±1.0 K

Temperature deviation in space

空間溫度偏差                                    ±0.5 K to ±2.0 K

Calibration values校準點                   -40 °C cold chamber and +125 °C hot chamber
                                                      冷箱-40 °C和熱箱+125 °C

Heating rate of hot chamber

according to IEC 60068-3-5

按照IEC 60068-3-5熱箱升溫速率 13 K/min.

Cooling rate of cold chamber

according to IEC 60068-3-5

按照IEC 60068-3-5冷箱降溫速率 5,3 K/min.

Heating rate of cold chamber

according to IEC 60068-3-5

按照IEC 60068-3-5熱箱降溫速率 2 K/min.

Temperature changing tests: MIL 883 E, Method 1010.7, Severity D with 12 kg of IC''''s

distributed over 3 shelves; measurement on test speci-mens

溫度變化試驗：按MIL 883 E, Method 1010.7, Class D，

12 kg的IC’s , 分散于3個樣品架，在試驗樣品上測量   

Adaption time < 15 min.恢復時間小于15分鐘

The following standards are met

滿足的試驗標準     DIN 40 046, page 14, test Na,

transfer time < 10 sec.;

IEC-60068-2-14, test Na,

transfer time < 10 sec.;

MIL-STD-810 E, method 503;

MIL-STD-883 E, method 1010.7

variants A,B,C,D,F

JEDEC standard JESD22-A101-A

Test space dimensions

試驗空間尺寸                                  470 mm wide 寬

                                                      650 mm deep 深

                                                      410 mm high 高

Standard features ...主機標準配置

·         Powder coated housing made of galvanised steel sheet

·         粉末噴涂鍍鋅鋼板外殼

·         Window, 355 mm x 355 mm, in the hot chamber

·         熱箱配置觀察窗355 x 355 mm

·         1 Ultra-lightweight shelf incl. rails1個輕質樣品架，包括導軌

·         Cradle in loading position locked吊籃在裝載樣品位置被鎖定

·         Max. loading capacity of cradle 50 kg吊籃zui大負載能力50 kg

·         80 mm leadthrough直徑80 mm引線孔

·         volume compensation system for long-term operation

·         *操作使用大容量補氣系統

·         water-cooled refrigeration unit水冷卻制冷系統

·         CFC-free refrigeration cycle全封閉無氟制冷循環

·         Comfortable Color-Touchpanel彩色觸摸式控制器

·         Highly efficient 32 bit control and monitoring system
SIMCON/32 NET /32位高效控制和監測系統SIMCON/32 NET

·         Digital-I/O, potential-free 24 V, 4 freely disposable inputs/outputs

·         數字式I/O，零電勢24V，4個可自由選用的輸入/輸出

·         Independent adjustable temperatur limiter t_min/t_max in cradle

·         吊籃中的獨立的、可調節的溫度限制器，zui低溫度/zui高溫度

·         Potential free contact for switching-off of test specimens

·         用于試驗樣品開關的無電勢接觸器

·         adjustable software temperature limiter min/max

·         可調節的軟件溫度限制器，zui低溫度/zui高溫度

·         Serial interface 接口RS 232

·         Trend display試驗狀態顯示

·         Cycle couter, total no. of cycles / remaining run time

·         循環計數器，總試驗循環計數器/剩余運行時間

·         Operating hour counter工作小時計數器

·         European socket歐洲型插座

·         Temperature control using movable sensor in cradle or
alternatively fixed sensor in hot or cold zone

·         溫度控制用吊籃中移動傳感器或更換冷溫箱或熱箱中的固定傳感器

·         Defrosting cycles automatic and programable自動除霜和程序除霜

·         Dwell time start programable可編程計算停留時間

·         Already programed and may be called up at any time:
MIL 883 E, method 1010.7 Intensity of test A,B,C,D,F

·         隨時可以調用已經固化的試驗程序，美軍標準MIL 883 E, method 1010.7 intensity of test A B,C,D,F

·         Calibration of 2 temperature values2點溫度值校正

·         1 Operating instruction操作手冊一套

用戶的滿意是我們服務的宗旨，完善的售后服務使您解除一切后顧之憂，我們堅信一個好的企業賣出去的不僅僅是一臺好的產品，更重要的是良好的服務。

Best regards!

廣東宏展科技有限公司-西南辦事處

Guangdong Hongzhan Technology Co.,Ltd

秦 玉 玲  qin yuling

Phone:135 9430 9859

:cq@oven.cc   www.oven.cc 

：