固體絕緣材料介電擊穿強度實驗儀
設備型號：DDJ-50KV
Mode of Equipment: DDJ-50KV
控制方式：微機控制
Mode of Control: Microprocessor Control
固體絕緣材料介電擊穿強度實驗儀滿足標準：GB/T 1408-2006 絕緣材料電氣強度試驗方法
          ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法.
The breakdown voltage tester meets the following standards:
GB/T 1408-2006 Standard Test Method for Electric Strength of Insulating Materials.
ASTM D149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electric Insulating Materials at Commercial Power Frequencies.
固體絕緣材料介電擊穿強度實驗儀適用范圍及功能
主要適用于固體絕緣材料（如：塑料、橡膠、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等介質）在工頻電壓或直流電壓下?lián)舸姸群湍碗妷旱臏y試。
The tester is mainly used in testing breakdown strength and withstand voltage of solid insulating materials (including plastics, rubber, film, resin, mica, porcelain, glass and insulating varnish etc.) at power frequency voltage or direct voltage.
本儀器由電腦控制，是我公司自主研發的全新第二代介電擊穿檢測儀器，本儀器由數字集成電路系統與軟件控制系統兩大部分構成，使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據?？蓪崟r繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，打印試驗數據。
The tester is controlled by computer and it is the second-generation dielectric breakdown tester independently developed by our company. The tester comprises digital integrated circuit system and software control system to let the rate of voltage boost accuray, exactly and immediay detect the data of leakage current. The tester is capable of drawing the real-time curve, displaying the test data with the accurate diagnosis, saving, analyzing and printing the test data.
（淘汰了*代產品通過調壓器和步進電機進行升壓而導致無法檢測漏電電流、步進電機丟步而導致升壓速率不準確、步進電機在升壓過程中擊穿試樣后由于轉速慣性而無法立刻停止而導致?lián)舸╇妷簲?shù)據錯誤，并且復位需要通過物理接觸來完成等缺點 ）。
(The tester overcomes the disadvantages in the first-generation tester; for example, the first-generation tester boosts the voltage with voltage regulator and stepping motor so that it fails to detect the leakage current. Furthermore the stepping motor loses the step to cause the inaccurate rate of voltage boost, and the stepping motor causes the breakdown voltage data error in the process of voltage boost because it fails to stop after breaking down the sample due to the inertia of rotation speed. Also it realized the reset by physical control).
固體絕緣材料介電擊穿強度實驗儀技術要求：
III. Technical Requirement:
01、電壓擊穿試驗儀輸入電壓： 交流 220 V
01. Input Voltage: AC 220 V
02、輸出電壓： 交流 0--50 KV ;
02. Output Voltage: AC 0--50 KV;
               直流 0—50 KV
DC 0—50 KV
03、電壓擊穿試驗儀電器容量： 3KVA
03. Capacitance of Electrical Device: 3KVA
04、電壓擊穿試驗儀高壓分級： 0--5KV； 0-10KV； 0--20KV；0--50KV
04. High Voltage Hierarchy: 0--5KV; 0-10KV; 0--20KV; 0--50KV
05、升壓速率： 100 V/S   200 V/S   500 V/S   1000 V/S   2500 V/S   5000 V/S
                 （備注：電壓擊穿試驗儀可以根據用戶需求設定不同的升壓速率）
05. Rate of Voltage Boost: 100 V/S   200 V/S   500 V/S   1000 V/S   2500 V/S   5000 V/S
(Note: Different rates of voltage pressure available according to user’s different requirement)
06、試驗方式：
06. Test Method:
           電壓擊穿試驗儀直流試驗：1、勻速升壓  2、梯度升壓  3、耐壓試驗
           電壓擊穿試驗儀交流試驗：1、勻速升壓  2、梯度升壓  3、耐壓試驗
DC Test: 1. Voltage boost at constant velocity   2. Gradient voltage boost   3. Withstand voltage test
AC Test: 1. Voltage boost at constant velocity   2. Gradient voltage boost   3. Withstand voltage test
07、電壓擊穿試驗儀安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.1S內切斷電源
07. The tester is equipped with the high-sensitivity over-current protective device to ensure that the power is cut off within 0.1S when breaking down the sample.
08、電壓擊穿試驗儀采用*的無觸點原件勻速調壓方式。
08. The tester adopts the advanced non-contact original voltage regulation mode at constant velocity.
09、支持短時間內短路試驗要求。
09. The tester supports short circuit test in a short period.
10、電壓擊穿試驗儀電壓試驗精度： ≤ 1％
10. Precision of voltage test: ≤ 1％
11、電壓擊穿試驗儀試驗電壓連續可調： 0--50 KV
11. Test voltage to be continuously regulatory: 0--50 KV
12、電壓擊穿試驗儀耐壓時間設定：0-6小時
12. Withstand voltage duration setting: 0-6h
     13、支持20S,60S急速升壓.
     13. The tester supports 20S and 60S voltage boost at high velocity
產品型號：
DDJ-10KV
DDJ-20KV
DDJ-30KV
DDJ-50KV
DDJ-100KV
DDJ-150KV
親：
1.可免費為客戶檢測試樣；
2.可以根據不同客戶的需求進行訂做產品。
3.售前，我們專門派技術人員為您設計*的流程和方案；
4.信后，將免費指派技術人員為您調試安裝；
5.保修一年，產品終身維護；
6.常年供應設備的易損件及耗品，以確保產品長期使用。
產品鏈接：http://www.guance17。。ｃｏｍ
北京冠測試驗儀器有限公司專注于試驗方法的創新及應用，是集研發、生產、銷售、售后于一體的專業試驗儀器供應商！
咨詢洽談業務!