| 注冊| 產品展廳| 收藏該商鋪

行業產品

當前位置:
廣東宏展科技有限公司>>技術文章>>ASTM D1735-14測試標準

產品分類品牌分類

更多分類

ASTM D1735-14測試標準

閱讀:2430        發布時間:2018-7-23

本頁面標準信息均來源于網絡收集,或由參與標準制定的供應商提供,只作為參考使用,為確保測試結果的準確性、節省您的時間,如需ASTM D1735-14標準詳細信息或ASTM D1735-14具體測試方法,歡迎與我們技術人員聯系或給我們留言,我們將為您相關的技術支持。

ASTM D1735-14標準介紹

 

ASTM D1735-14英文簡介


1. Scope

1.1 This practice covers the basic principles and operating procedures for testing water resistance of coatings in an apparatus similar to that used for salt spray testing.

1.2 This practice is limited to the methods of obtaining, measuring, and controlling the conditions and procedures of water fog tests. It does not specify specimen preparation, specific test conditions, or evaluation of results.

Note 1: Alternative practices for testing the water resistance of coatings include Practices D870, D2247, and D4585.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 

2. Referenced Documents

ASTM Standards

B117 Practice for Operating Salt Spray (Fog) Apparatus

D609 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

D610 Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

D714 Test Method for Evaluating Degree of Blistering of Paints

D823 Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

D870 Practice for Testing Water Resistance of Coatings Using Water Immersion

D1193 Specification for Reagent Water

D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

D1730 Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

D2247 Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity

D2616 Test Method for Evaluation of Visual Color Difference With a Gray Scale

D3359 Test Methods for Measuring Adhesion by Tape Test

D3363 Test Method for Film Hardness by Pencil Test

D4541 Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

D4585 Practice for Testing Water Resistance of Coatings Using Controlled Condensation

 

Q-fog鹽霧試驗箱用于ASTM D1735-14鹽霧測試的步驟

[Q-fog鹽霧試驗箱用于ASTM D1735-14鹽霧測試的步驟]

Q-fog鹽霧試驗箱用于ASTM D1735-14鹽霧測試的步驟

 

▼ASTM D1735-14第三方檢測機構

以上標準信息來自互聯網搜索整理,如需了解完整的ASTM D1735-14的信息或ASTM D1735-14標準解讀,歡迎詳詢。

 

收藏該商鋪

請 登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~
二維碼 意見反饋
在線留言