HDA3800系列壓力傳感器：對于冶煉工程和鋼鐵廠
這種高精度壓力傳感器是專門為在開發和冶煉，鋼鐵廠技術復雜的測量任務的調整。該設備配有帶薄膜的DNS非常強大的傳感器單元是在一個不銹鋼膜片裝置。由于相對于溫度的影響（零點和量程溫度漂移的謊言都在± 0.01％量程/° Czui大）和準確度（±0.15％，財政司司長典型。）其出色的數據，它是理想的設計，合理利用，當時那里的環境條件。杰出的EMC特性確保信號zui難的，高頻率，電磁干擾變量的穩定。

財政司司長精度±0.15％典型值。
測量范圍：0.. 6巴和0.. 600酒吧
特別調整的鋼鐵廠冶煉和復雜的測量任務。
非常強大的磁性傳感器
非常低的溫度誤差
杰出的EMC性能
的長期穩定性

Available versions: For smelting works and steel mills
This high-precision pressure transducer was specially developed and adjusted for the sophisticated measurement tasks in smelting and steel works technology. The device is equipped with a very robust sensor cell with a thin-film DNS which is fitted on a stainless steel diaphragm. With its outstanding data with respect to temperature influence （temperature drift for zero point and range both lie at a maximum of ±0.01% FS/°C） and accuracy （±0.15% FS typ.）, it is ideally designed for utilisation under the environmental conditions prevailing there. The outstanding EMC properties ensure signal stability with the hardest, high-frequency, electromagnetic disturbance variables.

Accuracy ±0.15% FS typ.
Measurement ranges: between 0 .. 6 bar and 0 .. 600 bar
Specially adjusted for the sophisticated measurement tasks in smelting and steel works.
Very robust sensor cell
Very low temperature errors
Outstanding EMC properties
Excellent long-term stability