寶帝兩位三通伺服輔助電磁閥，BURKERT伺服輔助電磁閥 返回列表頁

寶帝兩位三通伺服輔助電磁閥，BURKERT伺服輔助電磁閥
二位二通電磁閥
與伺服活塞的更高的壓力
這個導控制電磁閥帶伺服活塞
閉合無動力和適用于控制
液體和氣體介質在高壓力。
14.5磅（ 1巴）的zui小壓差
*打開閥門所需。關閉時間為
DN 20和25可連續調節。
Orifi CE 7/16“ - 1 ”（直徑12 - 25毫米）
閥體材質黃銅
閥內件不銹鋼，黃銅
密封材料NBR ， PTFE閥座密封
介質中性介質，壓縮空氣，水，液壓油
介質溫度+14+194 °F （ -10+90°C ）
環境溫度Max 。 +131°F （ +55°C ）
電壓容差± 10 ％
占空比100 ％連續額定
工作電氣連接符合。根據DIN 43650 A型電纜插頭
（見附件）
防護等IP 65，電纜插頭
安裝根據需要，將執行機構直立
Operating voltages 24, 110, 220, 240 V/50 Hz,
Duty cycle 100% continuously rated.
Use reduced switch-on
time for manifold
寶帝兩位三通伺服輔助電磁閥，BURKERT伺服輔助電磁閥
installation, depending on
operating conditions.
Cycling rate approx. 1000 c.p.m.
Rating with cable plug IP 65
Seal Materials / Fluids Handled / Temp.-Range
NBR Neutral fluids, e.g. compressed air, town gas,
water, hydraulic oil, oils and fats without
additives 0 to +90 °C
EPDM Oils and fat-free fluids, e.g. hot water
alkaline washing and bleaching lyes
-30 to +90 °C
FPM Hot air, oxygen, per-solutions, hot oils with
additives -10 to +90 °C
For more detailed information please refer to resistance
chart （Leaflet-No. 1896009）.
Max. ambient temperature +55 °C
Max. viscosity 37 mm2/s
Response times opening AC: 8-15 ms, DC: 10-20 ms
Installation / Accessories