CO2 and hypoxia controller - CO2-O2-MI

CO2 and hypoxia controller - CO2-O2-MI

CO2 and hypoxia controller - CO2-O2-MI

二氧化碳和氧氣控制器

CO2和缺氧控制器CO2-O2-MI

用于微型培養箱。連接到帶有壓縮二氧化碳?xì)怏w和平衡氣體的鋼瓶-

通常是氮?dú)?。輸出直接連接到培養箱或加濕器的氣口?？刂破?/p>

使0-20%的二氧化碳和0-20%的氧氣混合物在培養箱中供應。二氧化碳控制在5%的水平

培養基的pH值恒定。使用簡單：控制器船校準為5%的二氧化碳水平要求。罐頭

調整以填充不同體積的培養箱。該儀器不僅可以控制

孵化器，同時也將氣體消耗降到低。項目#：CO2-O2-MI

•輸入：大150PSI

•輸出：大750 sccm

•連接器：易于連接，5/32英寸。

（4毫米）外徑輸入管；1/8英寸。輸出

油管；或1/4英寸。O、 D.管道，或#10-

32個螺紋接頭

•指示器：二氧化碳、氧氣的數字顯示

和水位

•控制：

二氧化碳水平0-20%

氧氣水平0-20%

流量高達750 sccm

輸入壓力調節器0-25PSI，

關閉二氧化碳和氮?dú)忾_(kāi)關，

•尺寸：12 x 6 x 9英寸。。

•功率：100-230VAC 25W

 CO2 & O2 Controllers

For use with miniature incubators. Connects to a cylinders with compressed CO2 gas and balance gas -
Nitrogen usually. The output connects directly to a gas port of the incubator or a humidifie . The controller
makes 0-20% CO2 and 0-20% O2 mixture to supply inside the incubator. CO2 control at 5% level keeps
pH of media constant. Simple to use: the controller ships calibrated for 5% CO2 level requirement. Can
be adjusted to fill incubators of di ferent volumes. The instrument not only controls gas content inside the
incubator, but also brings the gas consumption to the minimum. Item#: CO2-O2-MI
• Inputs: max 150PSI
• Output: 750 sccm max
• Connectors: Easy-connect, 5/32in.
(4mm) O.D. input tubing; 1/8in. output
tubing; or 1/4in. O.D. tubing, or #10-
32 threaded connectors
• Indicators: digital display of CO2, O2
and flow level
• Controls:
CO2 level 0-20%
O2 level 0-20%
FLOW up to 750 sccm
INPUT PRESSURE regulators 0-25PSI,
CLOSE switches for CO2 and N2,
• Dimensions: 12 x 6 x 9in..
• Power: 100-230VAC 25W

注：楊清辰發布