Adjustable Tubing可調管/電極夾MTH

Adjustable Tubing可調管/電極夾MTH

Adjustable Tubing可調管/電極夾MTH

可調管/電極夾MTH

在樣品室周圍放置多個管子、探針、玻璃毛細管和電極。這個

微型支架可以連接到顯微鏡適配器或任何磁性表面。幾個持有者可以

放在同一個適配器上。支架包括多個延伸臂、球頭和雙卡箍

用于易碎附件（例如電極）。每只手臂增加約1英寸。延伸。分機是

使用拇指螺絲固定，可以方便地配置和調整傾斜、擺動和旋轉

多軸角度。以下是可能的配置。不需要額外的工具。簡單地說

任何鐵表面上的支架和強磁鐵將使管子和其他附件牢固就位

樣品周圍的任何地方。支架的底座只有0.75英寸。直徑。磁性底部是

覆蓋有特氟隆薄膜，可沿金屬表面輕松移動支架。配有支架fs

在沒有磁鐵的M6或1/4-20螺紋表面上。帶有粘合磁條，用于連接

即使是非磁性和塑料表面的支架?？捎糜诠嘧ⅰ⒖刂屏髁亢臀⒘?/p>

灌注系統(tǒng)以及保持電極。在下一頁中是使用

包括的零件，以及MH-1支架項目#：MTH可能的所有配置

•腳?。?8毫米

•擴展：x2 1英寸。長，x1直角，x1

安裝4毫米桿。帶雙夾鉗。

•球頭：x1

•管夾：x1和x1雙夾

•安裝：磁性，M6和1/4-20

螺紋表面和帶貫穿件的表面

孔（可選的MH-SCR適配器可能是

必須）。

 Adjustable Tubing/Electrode Holder MTH
Position multiple tubing, probes, glass capillaries and electrodes around your sample chamber. This
miniature holder can be attached to a microscope adapter or any magnetic surfaces. Several holders can be
placed on the same adapter. The holder includes a number of extension arms, ball joint and double-clamp
for fragile accessories (electrodes for example). Each arm adds approx. 1 in. to extend. The extensions are
attached using thumb screws, which allow easy configurations and adjustments of tilt, swing, and rotation
angles in multiple axes. Below are possible configurations. No extra tools are needed. Simply put the
holder on any iron surface and the strong magnet will keep the tubing and other accessories firmly in place
anywhere around your sample. The base of the holder is only 0.75in. diameter. The magnetic bottom is
covered with Teflon film to move the holder easily along metal surfaces. Comes with stand fs to mount
on M6 or 1/4-20 threaded surfaces without magnet. Comes with adhesive magnetic strip to attach the
holders even to non magnetic and plastic surfaces. Can be used with perfusion, controlled flow and micro
perfusion systems as well as to hold electrodes. On the next page are possible configurations made using
the included parts, plus all configurations possible with MH-1 holders Item#: MTH
• Foot print: 18mm
• Extensions: x2 1in. long, x1 right-angle, x1
mounting 4mm rod. with double clamp.
• Ball-joint: x1
• Tubing clamp: x1 and x1 double-clamp
• Mounting: Magnetic, M6, and #1/4-20
threaded surfaces, and surfaces with through
holes (optional MH-SCR adapter might be
required).