快速檢測塑料水分儀器

 
SFY-100 Plastic Fast Moisture Meter

Necessary Detecting Instruments for Plastic Enterprises

II. Introduction of the Product:

Guanya Brand Plastic Fast Moisture Meter is the most advanced new plastic fast moisture meter studied and developed by Guanya Company in light of crack, bubbling and shrinking caused by much moisture in raw materials in the control of production, injection molding and moulding technology in current plastic industry, which has no moveable parts outside and needs not to set measuring sample and time. Germany advanced technology is introduced in the weighing system so as to avoid instability and easy aging of domestic magnetic sensor. The heating system applies halogen heat device with humane operation so that experimenters can operate it without special training. Its date is shown in Chinese and the measurement result is visible and accurate. Instant printing function can be operated by a key; standard 232 interface and exclusive software can realize on-line operation; data is collected, analyzed, stored and printed at real time. At present, it has been extensively applied to produce various raw materials, semi-finished products and finished products in the plastic industry; for example, polyethylene （PE）, polypropylene （PP）, polrvinyl chloride（PVC）, polystyrene （PS）, ABS resin （acrylonitrile-butadiene-styrene copolymer）, polyamide （PA）（called nylon usually）, makrolon （PC）, polyformaldehyde （POM）, modified polyphenylene oxide, thermoplasticity （PET）, polyphenylene sulfide （PPS）, liquid crystal polymer LCP, polyether-ether-ketone （PEEL）, polyether ketone （PEK）, polyether sulfone （PES）, PETG, engineering plastics – polysulfone （PSF）, particles, auxiliaries, master batch, wooden plastic and wood flour and so on.

III. Product Characteristics:

1. Exclusively used in the plastic industry

2. Full-automatic test mode

3. Exclusive software and micro-printer with standard configuration

4. Fast test before and after dehumidification of samples

5. Stand-by operation of particle and powder

6. High efficiency, fast speed; 3 minutes

7. Need no installation, debugging and training

IV. Technique Data:

1. Weighing Scope: 0-150g

★★The adjustable test space is 3cm, 5cm, 10cm

2. Scope of Moisture Measurement: 100PPM—1000000PPM

★★Sensor of JK Weighing System

3. Quality of Sample: 0.5-150g

4. Scope of Heating Temperature: From starting to 250℃

★★Strain Mixed Gas Heater

★★Max. temperature for trimming automatic compensation is 10℃

5. Readability of Moisture Content: 100 PPM

6. Display Parameter: 7 kinds

★★Moisture Content, Initial Value of Sample, Final Value of Sample, Test Time, Initial Value of Temperature, Final Value, Value of Constant Weight

7. Double Communication Interface: RS 232（printer: standard configuration）

                                      RS 232（connecting software: standard configuration）

8. Dimensions: 380×205×325（mm）

9. Power Supply: 220V±10%

10. Frequency: 50 Hz±1Hz

11. Temperature of Working Environment: -5℃－50℃

12. RH: ≤80% RΗ

13. Net Weight: 3.7 Kg