希而科*歐洲工控產品 物流快 * 

希而科工業控制設備(上海)有限公司 

：

公司歷史：Silkroad24于1999成立，16年備件銷售積累，勵志成為國內“零出錯率”歐洲工業自動化儀器儀表，備品備件供應商。

公司規模：100人左右

公司模式：德國本土采購，德國倉庫拼單操作，為客戶節約了成本，提高了采購效率。提供原裝產品，真正做到了讓客戶服務滿意，采購放心。

航班周期：每天安排航班，保證貨物時效，

貨物包裝：長期以來積累了大量貨物運輸包裝經驗，所有貨物均在國內進行二次包裝，規避國內運輸風險。

售后服務：客服，返修集中操作，完善的售后系統確?？蛻魺o后顧之憂。

處理效率：ERP系統做單，可以提供訂單全程查詢。

品牌   型號
When using power supplies in redundancy, decoupling diodes must be used to avoid one power supply
to feed its power into the output of another power supply.
Are power supplies from Kniel prepared for redundancy operation (1.3.3)
DemoApp2
Our digitally programmable power supplies can be operated remoy from a PC by means of a
LabVIEW application. Each of these power supplies comes with a data carrier loaded with this
application.
Where do I find firmware, drivers and other software like DemoApp or LabVIEW VIs for download
(0.3.1)
Description
The description (where applicable) is part of the manual of a power supply and covers a broader
view on the application of the power supply. Together with the datasheet the description makes
the manual of the product. Both documents should be available to the qualified personnel that
sets the power supply up. The datasheet of a power supply can be found on the productpage of the
power supply and in the tables.
Digital interfaces
Our digitally programmable power supplies offer several interfaces, sometimes as option: RS232,
USB, CAN, LAN.
What is the difference between CAN-Bus and CANopen (1.5.3)
Does the digital interface allow to control Kniel power supplies remoy (1.5.4)
DIN EN ISO 9001 Certificate
DIN-rail mounting
A wide range of our power supplies are suitable for mounting on DIN-rails according to EN 50022
or can be adapted to be so.
How does one find out, which wall bracket goes with which 19”-unit (3.2.2)
Can I order power supplies ready for mounting on walls or DINrails ex works or do I have to
retrofit the wall bracket and/or rail mounts How can I order this (3.2.3)
Discontinued
We can pronounce a type discontinued. Usually this means, the product will still be available for
purchase for a given time. For new projects the customer should go for the successor type.
How do I know which type is the successor of an outdated unit (0.4)
Dodd-Frank Act
You find our current declaration as PDF here http://kniel.de/download/Kniel-Kundeninformation-
Dodd-Frank-Act.pdf in german and herehttp://kniel.de/download/Kniel-customer-information-Dodd-
Frank-Act.pdf in english.
Downloads
Datasheet and description of each power supply can be found on the product page of the unit and
in the column Manual in the tables. Depending on the article, more files are available, eg 3D-
data or software.
Driver
The USB driver for our digitally programmable power supplies can be found on the accompanying
data carrier.
E
EDS data
The EDS data for our digitally programmable power supplies can be found on the accompanying data
carrier.
Electronic load
Some of our power supplies have an integrated electronic load.
energy...
Part of the name od several series of power supplies for 19"-systems. Always connected with a
number, indicating roughly the nominal output power. Eg energy 1200 installation, energy 3000.
Extern ON/OFF
Power supplies equipped with Extern ON/OFF can be switched off be applying an external voltage to
an input (or on again if the voltage goes away). The exact function is explained in the
description of the power supply.
Is it mandatory to connect the Extern ON/OFF“-input (1.1.1)
How does the Extern ON/OFF“-input work (1.1.2)
F
Firmware
Our digitally programmable power supplies (energy..., energy ... installation) have their own
internal software. This software is subject to constant developement. The latest release for each
unit can be found on the pwodurct page of the unit. You need our Flashtool to replace the
firmware.
Flashtool
Our Flashtool is the tool to update the firmware in your digitally programmable power supply
(energy..., energy ... installation).
Full rack width
Some of our power supplies are designed to take the full width (84HP) of a 19“ rack, eg energy
1500, energy 3000.
Power supply in full rack width
Does Kniel build complete sub racks (0.2.2)
G
Guarantee
See warranty.
Guide rails
Guide rails hold power supplies in a 19"-rack. Guide rails are directional dependant; the right
rails must be mounted inverted.
Is it normal, that the power supply needs quite some force to be pushed into the 19”-system
(3.1.3)
H
HP
HP is a dimension unit of the 19”-system and is used to indicate the height of a unit. One HP -
front panel related - equals to 1.75” or 44.45mm.
What does U and HP stand for (3.1.1)
I
Input voltage ranges
Depending on the topolpgy our power supplies are equipped with different ranges for the input
voltage. DC/DC-converters have input voltage ranges between 18 Vdc and 300 Vdc:
18 - 36 Vdc
36 - 75 Vdc
43 - 53 Vdc
75 - 150 Vdc
150 - 300 Vdc
Units with AC input are either designed for 115 Vac or 230 Vac or can accept both input voltages.
Depending on series the units have a wide range input, automatic range selection or can be
switched manually between the ranges. Units of the series energy 3000 need a 3-phase mains input
(3x400 Vac).
installation
Part of the name of a series of power supplies especially designed for mounting on walls like
electrical cabinets. Eg energy 400 installation, energy 1200 installation. Matching variants of
our Modules are available, too. Units of other serieses can be retrofitted or adapted.
L
LabView VI
To make integration of our digitally programmable power supplies (energy..., energy ...
installation) into your automated processes as easy as possible, we deliver not only the DemoApp
with which you can control the power supply from a PC but als LabVIEW VIs ythat you can integrate
into your own applications. DemoApp and LabVIEW VIs accompany the power supply on delivery.
You can find the current version on the product page and in the details view in the tables.
LabVIEW is a product from National Instruments.
Lantronix
For our power supplies with LAN interface we use an Ethernet module called XPort fromLantronix .
Two installers from Lantronix are required to enable your PC to connect via the LAN interface to
the power supply. Please make sure your computer has the current version of Microsoft .NET
Framework 4 installed, as both Lantronix applications require it.
The Device Installer is used to assign IP and other network specific addresses to the XPort
module in your power supply. The Com Port Redirector maps the TCP/IP connection to the XPort in
your power supply - configured with the device installer as stated above - onto a virtual COM
port.
Where do I find Lantronix Device Installer and COM Port Redirector Installer setup files (0.3.6)
low emission
A circuit technology developed by Kniel to combine the advantages of linear regulators and
switched power supplies.
M
MD5 checksum
To enable you to check the integrety of the file you downloaded from us, we use MD5 checksums.
The checksums are shown near the download link. We only create checksums for files that get
wrapped in an ZIP archive. We do not calculate checksums for PDF files.
The checksum is always calculated from the file in the ZIP archive, never from the resulting
archive. You have to unpack the ZIP file before you can check the checksum of the contained file.
See also: https://en.wikipedia.org/wiki/MD5 .
For Windows Microsoft offers a tool to verify MD5 checksums:
https://support.microsoft.com/en-us/help/841290/availability-and-description-of-the-file-
checksum-integrity-verifier-utility .
Mechanic shapes
Depending on electrical and mechanical application and technology our power supplies come in
different mechanical shapes. See Block, Cassette, installation, Modul, Steckcompact, Steckkarte,
Volleinschub.
Module (german: Modul)
A Kniel specific term for a mechanical shape of power supplies. Besides of ventilation openings a
Module is compley enclosed. Depending on output power Modules come in different length while
all have the same cross section. Modules are available for 19“ systems, for wall mounting and
for DIN-rail mounting. Modules can come as switchers with AC or DC as input (lacquered RAL6026)
Modules lacquered in RAL6026
and as low emission in transparent chromatized.
low emission Modules in transparent chromatized
N
Nemko
Norges Elektriske Materiellkontroll is a private norwegian organisation for testing and the
certification of electrical equipment. Some of our products carry the N-logo.
What does Nemko stand for (1.6.3)
O
Order number (german: Artikelnummer)
Article numbers consist of 8 digits and follow the pattern 123-456-78. The dashes are
significant.
Over voltage protection (OVP) (german: überspannungsschutz üSS)
Protects a power supply against voltages on the outputs that exceed a given limit.
What is OVP (over voltage protection) german: üSS (überspannungsschutz) (1.5.5)
P
Part number (german: Artikelnummer)
Power Boost
Our power supplies deliver their rated power output up to 70°C ambient temperature. Up to 45°C
ambient temperature many of our power supplies can deliver more, we call this Power Boost (PB).
You find whether your power supply has this feature and the value of it if applicable in the
datasheet of the power supply.
PQube
PQube is a modular system for monitoring the quality of a power grid and energy consumption.
What is PQube (4.0)
Pre fuse
The data sheets of our power supplies contain information about the integrated fuse and the
inrush current.
How should a pre-fuse be dimensioned (1.6.1)
Primary switcher (german: Primrschaltregler)
Switched power supply with DC as input voltage, comes in different housing variants.
Programming
Many of our power supplies can be analog and/or digital programmed. Digital programming is done
either directly on the unit, by using an external control unit (HMI) or from your PC via one of
several interfaces (RS232, USB, CAN, LAN). In most cases analog programming is done using a
programming voltage (typically 0-5V or 0-10V) or resitance (typically 0-10kΩ).
Additionally all of our regulted power supplies are adjustable. Meaning, the output voltage can
be altered in a given range around the nominal output voltage using the potetiometers at the
front panel. The range depends on the unit in question.
Q
QPS
QPS is a service recognized as NRTL (Nationally Recognized Testing Laboratory). Our qualified
products carry the QPS certification mark.
Quality management system (QS)
R
REACH
Registration, Evaluation, Authorisation and Restriction of CHemicals
REACH-Erklaerung.pdf in german and herehttp://kniel.de/download/Kniel-customer-information-
REACH-declaration.pdf in english.
Where do I find information concerning REACH (0.3.2)
Recessed installation
If multiple components should vanish behind a common front panel, the components must support
recessed installation meaning they have a shortened front panel or none at all. Many of our power
supplies are available in a housing variant suited for recessed installation.
Repairs
We offer to repair our products as a service. This service is subject to a charge if the repair
is not covered by our 5 year guarantee.
Who can help me if a Kniel product needs repair or calibration (0.5.1)
RoHS

希而科優勢銷售歐洲*工業備件

希而科優勢銷售歐洲*工業備件