液壓和工業(yè)產(chǎn)品/東京計器TOKYO-KEIKI壓力傳感器PRESSURE SENSOR ETPP-H-HHD-10(M)
東京計器TOKYO-KEIKI壓力傳感器PRESSURE SENSOR 型號選型規(guī)則ETP | P | - | H | - | H | H | D | - | W | - | (C) | - | 10 | 1 | 2 | | 3 | | 4 | 5 | 6 | | 7 | | 8 | | 9 |
|
1. | Elec. pressure sensor | 2. | Mounting | | P: | R1/4 (PT1/4) | | F: | G1/4 (PF1/4) O-ring seal | 3. | Pressure sensing range | | L1: | 0 - 1.0 MPa | | L: | 0 - 10.0 MPa | | M: | 0 - 20.0 MPa | | H: | 0 - 35.0 MPa | | H1: | 0 - 50.0 MPa | 4. | Power | | H: | DC 24 V | | G: | DC 15 V | | E: | DC 15 V | 5. | Output rating | 6. | Accuracy | 7. | Cap | | W: | w/waterproof cap | 8. | Calibration switch | | Omit | for momentary switch | | C: | w/toggle switch | | self holding type | 9. | Design no. |
|
東京計器TOKYO-KEIKI壓力傳感器PRESSURE SENSOR 規(guī)格 |
Sensing,OutputPress. sens. rge. | Allow. Max. Press. (MPa) | Sym. | (MPa) | L1 | 0 - 1 | 2 | L | 0 - 10 | 20 | M | 0 - 20 | 40 | H | 0 - 35 | 52.5 | H1 | 0 - 50 | 75 |
|
Power | Power Consump. (at. load) | Sym. | | H | DC 24 V 15 % | 35 mA | G | DC 15 V 5 % | 30 mA | E | DC 15 V ?5 % | 35 mA |
|
Output Rating | Calibration Signal output | Sym. | | H | 0 - 10V. DC(min. load resistance 10 kΩ ) | 10 V | L | 0 - 5V. DC(min. load resistance 10 kΩ ) | 5 V | A | 4 - 20mA. DC(max. load resistance 350 Ω ) | 20 mA |
|
Accuracy | Temp. Charac. | Sym. | | *1C | 0.25 % F.S. | 0.025 % F.S./C | D | 0.5 % F.S. | 0.05 % F.S./C |
|
*1. Not available on pressure sensing range,L1,H,H1 models |
Response: w/in 1ms Affect of volt. fluct.: less than 0.1%F.S. of rated volt. |
Environment,ConstructionAllow. temp. range: | | -20 to +70C (0 to +70C to maint. accuracy) | Allow. humidity: | | 5-95% RH | Insul. resistance: | | above 100MΩ (DC 500 V mega) | Volt. resistance: | | AC 350 V 1 min. | Vibration resistance: | | JISD 1601 level 70 (70m/s2) X,Y,Z axis 4H | Shock resistance: | | JIS C 0921-1984 196m/s2X, Y, Z axis | Cycle durability: | | more than 107 times | Water resistance: | | splash proof (JIS C 0920) | Contact mat'l: | | SUS 630 or SUS 316 | Mass | | 320 g |
|