詳細介紹
- 甘油壓力表ø100
- OPG-AS-G3/8-100x40MPa ASK耐振甘油壓力表
- 關于常用壓力單位換算表kgf/cm2、psi、bar、MPa
發(fā)行各種壓力表相關證書(可追溯性圖,合格證書,檢驗結果,配置證書)。詳情請與我們。 | 特征 |
OPG-AS-G3/8-100x40MPa ASK耐振甘油壓力表 選型表:
| ||||||||||||||||||||||
Model | Glycerin pressure gauge | |||||||||||||||||||||
Profile | A : Frameless B : Round frame D : Embedded (with mounting pieces) | |||||||||||||||||||||
Stub form |
| |||||||||||||||||||||
Screw | G1/4 (ø60) R1/4 (Model A, ø60) G3/8 (ø75, ø100) | |||||||||||||||||||||
Dimensions |
| |||||||||||||||||||||
Pressure range (maximum indication) | See the pressure range table. |
甘油壓力表ASK耐振壓力表 OPG-AT-G3/8-75x16MPa 規(guī)格:
Applicable fluid | General petroleum based hydraulic, water, glycol based hydraulic oil, phosphate hydraulic oil, water | |
Accuracy | ±1.6%/F.S | |
Temperature range | -5~40℃ | |
Ambient tempreture error | ±0.3%/10℃ | |
Sealed liquid | Aqueous solution of glycerin | |
Permissible vibration range | 0~7G | |
Weight | 110g | |
Optional specifications |
|
壓力數值:
Pressure range | ø60 A type G1/4 | ø60 A type R1/4 | ø60 B type G1/4 | ø60 D type G1/4 | ø75 A type G3/8 | ø75 B type G3/8 | ø75 D type G3/8 | ø100 A type G3/8 | ø100 B type G3/8 | ø100 D type G3/8 |
0.25MPa | ○ | ※ | ※ | ※ | ||||||
0.6MPa | ○ | ○ | ○ | ○ | ||||||
1MPa | ○ | ○ | ※ | ○ | ※ | ※ | ※ | |||
1.6MPa | ○ | ※ | ※ | ※ | ||||||
2.5MPa | ○ | ○ | ※ | ○ | ||||||
4MPa | ○ | ○ | ※ | ○ | ○ | ※ | ※ | ※ | ※ | ※ |
6MPa | ○ | ○ | ※ | ○ | ○ | ○ | ○ | ※ | ※ | ※ |
10MPa | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ※ | ※ | ※ |
16MPa | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ※ | ※ | ※ |
25MPa | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ※ | ※ | ※ |
40MPa | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ※ | ※ | ※ |
60MPa | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ※ | ※ | ※ |
100MPa | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ |
※Incoming order production
How to use the safety mark (Only ø60mm)
Instruction for use
- Some combinations of shape, size, and pressure range are not available. Please refer to the type table for making your selection.
- The glycerin pressure gauge should be mounted vertically; otherwise an indication error or leakage of glycerin liquid may occur.
- We do not offer glycerin pressure gauge with a special hand-written graduation.
- Before use, remove the tip of the safety cap of the glycerin pressure gauge up to the 1MPa indication.
- As there is little torque of the Bourdon tube in pressure gauges of less than 1MPa, When the torque of the Bourdon tube in the pressure gauge up to the 1MPa indication is small, the temperature change (internal pressure change) in the gauge case will affect the indication accuracy. By removing the tip of the safety cap, a balance between the internal pressure and atmospheric pressure can be maintained, thereby preserving accuracy. After removing the safety cap tip, make sure that the safety cap faces upwards to prevent leakage of glycerin liquid.
Drawing data download
Product name | Type No. | Download |
---|---|---|
Glycerin pressure gauge ø39 | OPG-DT-39-S | |
Glycerin pressure gauge ø60, type A, G1/4 | OPG-AT-G-60 | |
Glycerin pressure gauge ø60, type A, G1/4 (stainless steel type) | OSG-AT-G-60 | |
Glycerin pressure gauge ø60, type A, R1/4 | OPG-AT-R-60 | |
Glycerin pressure gauge ø60, type A, R1/4 (stainless steel type) | OSG-AT-R-60 | |
Glycerin pressure gauge ø60, type B | OPG-BT-G-60 | |
Glycerin pressure gauge ø60, type D | OPG-DT-G-60-B | |
Glycerin pressure gauge ø75, type A | OPG-AT-G-75 | |
Glycerin pressure gauge ø75, type B | OPG-BT-G-75 | |
Glycerin pressure gauge ø75, type D | OPG-DU-G-75 | |
Glycerin pressure gauge ø100, type A | OPG-AS-G-100 | |
Glycerin pressure gauge ø100, type B | OPG-BS-G-100 | |
Glycerin pressure gauge ø100, type D | OPG-DS-G-100 | |
Pressure gauge with contact, ø75, type A | CEPG-AU-G-75 | |
Pressure gauge with contact, ø75, type B | CEPG-BU-G-75 | |
Pressure gauge with contact, ø75, type D | CEPG-DU-G-75 | |
Pressure gauge with contact, ø100, type A | CEPG-AU-G-100 | |
Pressure gauge with contact, ø100, type B | CEPG-BU-G-100 | |
Pressure gauge with contact, ø100, type D | CEPG-DU-G-100 | |
Pressure gauge with micro-contact, ø100, type B | MEPG-BU-G-100 | |
Pressure gauge with micro-contact, ø100, type D | MEPG-DU-G-100 | |
Diaphragm type pressure gauge G3/8 | SPG-A-G3/8-100-S | |
Diaphragm type pressure gauge G3/8, (sweep type) | SPG-A-G3/8-100-S-K | |
Diaphragm type pressure gauge R3/8 | SPG-A-R3/8-100-S | |
Diaphragm type pressure gauge R3/8, (sweep type) | SPG-A-R3/8-100-S-K |
* Please confirm "Terms of Use" about the use of PDF data.