首頁 >> 供求商機
The Check-Line TI-25S is ideal for the person that tests a few different materials regularly. The TI-25S contains 8 velocities of the most common materials (refer to complete list of Materials below) and two velocities that the user can set using a simple software program.
The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.
The Checkline TI-25S comes complete, ready to use, and is protected by our 5 year limited warranty.
Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
Measures from 0.025 to 6.000 inches (0.60 to 150.0 millimeters) switch to select English or metric units.
Four readings per second for single point measurements.
8 pre-set velocities and 2 custom velocities
Ability to change between velocities without the use of computer software
IP 65 Rated
Range in Steel | 0.025-6.00" (0.60-150.0 mm) Will vary in other materials |
Resolution | .001" (0.01 mm) |
Velocity Range | 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec |
Dimensions | 2.5 W x 4.75 H x 1.25 D inches |
Display | 4? - Digit, 0.5" Backlit LCD |
Probe | 1/4", 7.5 MHz, actual wearface is 3/8" (10 mm) |
Cable | 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C) |
Battery Type | Two 1.5V alkaline or 1.2V NiCad AA cells. |
Battery Life | Typically operates for 200 hours on alkaline and 130 hours on NiCad. |
Weight | 10 ounces (283 g) |
Accessories Included | Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
Warranty | Gauge: 5 Years |
訂貨清單
The TI-25S is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, PC-based Software, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.
配件
TICC-M Protective Holder for Most TI Series Gauges
CF12 Coupling Fluid - 12oz
V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)
T-102-3300 1/4" diameter, 7.5 MHz, dual element transducer (Standard Probe for TI-25S)
DATACOMM PC Program to download Custom #1 & Custom #2 calibrations to TI-25S (N-306-0010 cable must be ordered)
N-306-0010 6 foot RS232 Cable (DB-9 to Lemo 2 pin)
BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit
訂貨型號
TI-25S Ultrasonic Thickness Gauge Kit with T-102-3300 Probe
相關型號
TI-25M-UWM
TI-25-UM-50
TI-25LT
TI-25P
TI-25M
TI-25DL
TI-25M-MMX
TI-25DL-MMX
2