PVPM 1000C100

PVPM 1000C100

PVPM1000X
便攜式峰值功率和I-V曲線測量設備（曲線示蹤器），用于光伏模塊和高達1000V和20Adc的燈串
PVPM系列設備可測量光伏模塊和燈串的I-V曲線。通過獲得的程序，該設備可以直接在光伏系統的組裝位置測量并計算單個IV曲線的峰值功率Ppk，Rs和Rp，計算結果和圖表可以顯示在內部圖形LC顯示屏上，

不需要共同輸入詳細的模塊參數。

PVPM1000X是一款移動測量設備，在堅固耐用的防水塑料外殼中集成了電池電源和外部電池充電器。該設備具有自己的工業微型PC和高對比度TFT觸摸顯示器，因此其功能獨立于其他設備。但是，如果需要，可以連接一臺PC，以通過標準USB接口進行數據傳輸和測量值的進一步分析。

PVPM2540C
便攜式峰值功率和I-V曲線測量設備，用于光伏模塊和高達250V和40Adc的小串
PVPM系列設備可測量光伏模塊和燈串的I-V曲線。通過獲得的程序，該設備可以直接在光伏系統的組裝位置測量并計算單個I-V曲線的峰值功率Ppk，Rs和Rp，計算結果和圖表可以顯示在內部圖形顯示屏上。

不需要共同輸入詳細的模塊參數（但可以）。

PVPM2540C是一種移動測量設備，在堅固的鋁制外殼中集成了電池電源和外部電池充電器。該設備具有自己的工業微型PC和高對比度TFT觸摸顯示器，因此其功能獨立于其他設備。但是，如果需要，可以連接一臺PC，以通過標準USB接口進行數據傳輸和測量值的進一步分析。

PVPM1500XNewest peak power measurement device and IV-curve tracer for PV modules / strings / arrays, up to 1500V and 20ADC

This PVPM device allows the measurement of the IV characteristic of photovoltaic modules as well as strings and arrays up to 1500V and 20ADC. Using patented methods, the instrument can calculate the peak power, the Rs and the Rp from one measured characteristic directly at the installation site and display the values on the built-in graphic display.
The PVPM1500X is a portable instrument in a rugged and waterproof plastic housing with built-in battery power and external wide range battery charger. The device is equipped with its own high-performance miniature industrial PC and a high-contrast, high-resolution TFT graphic display and thus can be used independently. If required, however, a PC can be connected for data transfer and further analysis of the measured values ??via a standard USB interface.
The supplied calibrated irradiation reference sensor can be simply clamped e.g. to the module frame (parallel to the solar module).
The IV curve measurement runs very fast (in the millisecond range), the measurement results (for example peak power) are immediately displayed on the built-in TFT display and stored permanently inside the device. Up to 4 curve measurements per minute are provided.
Entering module data is not required for the measurement, but is supported both on-site at the meter and before the measurement campaign in the office. Additionally these informations can be added during evaluation in the office later on.
The PVPM1500X is conveniently operated via the touch function of the display and a screen menu. The functions are self-explanatory by simple symbols and the user is always guided by the program. An introduction to the device operation is hardly necessary.

• Technical data
• Scope of supply
• Documents

(Changes reserved)

Build in a stable and waterproof (IP67) plastic case with carrying handle, automatic pressure valve and tough front panel.

Measuring Unit:

• Miniature industrial PC 32Bit, real time clock, no mechanical moving parts
• Sampling rate max. 100kHz
• Resolution 0.01V - 0.25V, 0.005A – 0.01A (depending on sel. range)
• Accuracy of the a/d converter 0.08% of FSR±1 LSB
• Accuracy Peak power measurement: ±5%
• Reproducement: ±2-3%
• Duration of single measurement: 20ms up to 2 seconds, avoiding the influence of capacitive properties of the module under test
• Non volatile data storage for several thousand measurements
• Irradiance reference sensor (Phox) with integrated Pt100 or Pt1000 temperature sensor measures irradiance and cell temperature
• Other commercially available sensors as e.g. ISET-Sensor® can be connected using a reliable cable connection
• 4-wire-cabling between PVPM and generator under test avoids mis-measurement of voltage
• Additional measurement of the back surface temperature of the module under test (second input for Pt100 RTD available)
• Continuous long-term measurements of I-V-curves in selectable time intervals

The device may only be attached to a limited source of direct current (photovoltaic generator) with at most 20A

Measuring ranges of the PVPM1500X  (changes possible):

• Ranges for current and voltage can be combined in any order
• An optimal range is selected by the device automatically.

Display:

• Colour TFT display, LED backlight, touchpanel, resolution 480 x 272 Pixel, sunlight capable

Operation:

• Menu driven with touchscreen on the front panel
• Operation and evaluation alternatively by Windows software, connected via USB 2.0 standard cable

Power Supply:

• Li-Ion-battery 99.6Wh (continous operation up to 8 hours)
• External power supply wide range input (90-263Vac, 47-63Hz, 40W, Out 16Vdc), UL approved
• Integrated battery charger with overload and undervoltage protection for battery
• Display of battery state with LEDs at the front panel

Dimensions

• Width: 40.6 cm, Height: 17.5 cm, Depth: 33.0 cm, Weight: ca. 8,5kg

Operating Conditions:

More Products

• PVPM1000C
• PVPM1100C
• PVPM1040C
• PVPM1040X
• PVPM2540C
• PVPM1000X

PVPM1100C
便攜式峰值功率和I-V曲線測量設備，用于高達1000V和100Adc的光伏發電機
PVPM系列設備可測量光伏模塊和燈串的I-V曲線。通過獲得的程序，該設備可以直接在光伏系統的組裝位置測量并計算單個I-V曲線的峰值功率Ppk，Rs和Rp，計算結果和圖表可以顯示在內部圖形顯示屏上。

不需要（但可以）輸入詳細的模塊參數。

PVPM1100C是一種移動測量設備，在耐用的金屬外殼中具有集成的電池電源和外部電池充電器。該設備具有自己的工業微型PC和高對比度TFT觸摸顯示器，因此其功能獨立于其他設備。但是，如果需要，可以連接一臺PC，以通過標準USB接口進行數據傳輸和測量值的進一步分析。