OGSL-180-PUK-ST3

OGSL-180-PUK-ST3 OGSL-180-PUK-ST3

180毫米前叉?zhèn)鞲衅?，帶PNP，常開/常閉可切換輸出，激光束

2級可見光激光器，靈敏度可調

高分辨率和重現性

輸出-PNP，NO / NC可切換

高開關頻率

工作溫度范圍為-10ºC至+60ºC

IP 67密封等級，帶堅固的金屬外殼

貨叉寬度-180毫米
分辨率-0.05毫米
2類激光，650 nm
電源電壓-10-35 VDC
大輸出電流-200 mA
短路和極性保護
內部功耗-
電壓絕緣-500 V
響應/釋放時間-0.4毫秒
開關頻率-1.25 kHz
重現性-0.02毫米
開關磁滯-
50 k Klux的環境光抗擾度
堅固的陽極氧化鋁外殼
M8（3線）連接器

180 mm Fork Sensor with PNP, NO/NC switchable output, Laser beam

Class 2 visible laser with adjustable sensitivity

High resolution and reproducibility

Output - PNP, NO/NC switchable

High switching frequency

Operating temperature range of -10ºC to +60ºC

IP 67 sealing level with a robust metal housing

• Fork width  - 180 mm
• Resolution - 0.05 mm
• Class 2 laser, 650 nm
• Supply voltage - 10 - 35 VDC
• Max output current - 200 mA
• Short circuit and polarity protected
• Internal power consumption -
• Voltage insulation - 500 V
• Response / Release time - 0.4 ms
• Switching frequency - 1.25 kHz
• Reproducibility - 0.02 mm
• Switching hysteresis  -
• Ambient light immunity of 50 k Klux
• Sturdy anodized aluminum housing
• M8 (3 wire) connector