NRT-Z44

NRT-Z44 ROHDE&SCHWARAZ 

深圳扎克張瑞 188-24-24-30-80（V同）

NRT2

1430.0509.02

Grundgerät für einen R&S®NRT Sensor, Touchdisplay

NRT-Z43

1081.2905.02

Durchgangsmesskopf 0,4 - 4 GHz; 7 mW - 30(75) W

1081.1309.02

Durchgangsmesskopf 200 MHz - 4 GHz,30 mW - 120(300) W, N(f)

多種測量功能
R＆S®NRT-Z14，R＆S®NRT-Z43和R＆S®NRT-Z44電源
傳感器支持以下測量功能。
平均功率（RMS值）
此函數返回功率的平均值
任何類型的測試信號（已調制，未調制或多個
運營商）。測量范圍為35 dB至40
dB和高測量精度。
峰值包絡功率（PEP）和波峰因數
這兩個參數都提供有關峰值功率的信息
調制包絡并描述過載特性
發射器輸出級數。結果
波峰因數測量參考平均值
功率并以dB顯示。進行測量
使用可分幾步調整的視頻帶寬，
這樣即使是短時的高功率峰值也可以
決心。
平均爆發功率
此功能可用于測量調制和
根據平均功率和
占空比。兩者都可以由用戶定義或確定
由功率傳感器自動控制。
互補累積分布函數
（CCDF）
此函數測量峰值包絡的概率
功率超過預設閾值，因此幅度
具有未知包絡的信號分布可以
被確定。

R&S®NRT2 power reflection meter

??Simple touchscreen operation

??Simultaneous display of forward and reverse power

??Analog bargraph and autoscale

??Visual limit monitoring

??100 % code compatibility with predecessor model

?? page 4

R&S®NRT-Zxx directional power sensors

??Various sensor models

??Diverse measurement functions

??Direct power monitoring on a PC

?? page 5

Versatile applications

??Continuous monitoring of transmitter systems

??Power measurements with digital modulation

R&S®NRT

Power Reflection

Meter Family

At a glance

The R&S®NRT-Zxx directional power sensors are self-contained

measuring instruments. They can be connected directly

to the R&S®NRT2 or, via the R&S®NRT-Z5 USB interface

adapter, to the PC (communications via USB).

The compact R&S®NRT2 power reflection meter supports

all the measurement functions of the R&S®NRT-Zxx directional

power sensors. The large, user-friendly touchscreen

simultaneously displays the forward and reverse power.

The base unit is exceptionally easy and intuitive to use and

can be remotely controlled via LAN, GPIB (R&S®NRT2-B8

option) or USB.

Key facts

??Simultaneous display of forward and reverse power

??Measurement of average power, average burst power,

peak power, crest factor, CCDF and mismatch

??5" color touchscreen

??Direct operation of the R&S®NRT-Zxx directional power

sensors from a PC

??Frequency range from 25 MHz to 4 GHz

(sensor-dependent)

Simple touchscreen operation

Thanks to intelligent menus, the compact R&S®NRT2 base

unit with a state-of-the-art 5" touchscreen is extremely

easy to operate. On the top menu level, users can switch

between the most important measurements. Additional

parameters can be set in clearly structured submenus.

Important functions such as setting frequencies, zeroing

and creating screenshots can be accessed at the push of

a button.

Simultaneous display of forward and reverse

power

The R&S®NRT-Zxx directional power sensors simultaneously

measure forward and reverse power and calculate additional

parameters such as load matching. The R&S®NRT2

power reflection meter then displays one forward and one

reverse parameter at the same time.

The forward measurement function shows the average

power, average burst power, peak envelope power (PEP)

and the peak-to-average power ratio (crest factor). The

calculated absorption average power (forward minus reverse),

absorption burst power, absorption PEP and amplitude

distribution (CCDF) for modulated signals can also be

displayed.

The reflection measurement function displays the average

power, return loss, SWR, reflection coefficient and reflection

ratio in %.

Analog bargraph and autoscale

Measurements can be shown as numeric values or in an

analog bargraph. To define the analog measuring range,

the user starts the autoscale function by simply pressing

a button. The scale of the analog bargraph is optimally adjusted

to the measured signal.

Visual limit monitoring

Each measurement can be visually monitored. Values outside

the defined limits are highlighted in red. The analog

bargraph additionally graphically displays the defined limits

in red.

100 % code compatibility with predecessor model

The remote commands of the R&S®NRT2 are 100 %

code compatible with the command set of the previous

R&S®NRT model. This simplifies device replacement and

integration into existing systems (no additional programming

required). The R&S®NRT2 power reflection meter can

be remote controlled via USB or LAN. The R&S®NRT2-B8

option adds remote control via GPIB (IEEE 488).