9
9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath
微處理機控制ct - 2000系列恒溫浴適應粘度計管需要浴深度12”和提供可靠的溫度控制從10°C到150°C。該單元可容納7個同時粘度的測定。
精確和精確的溫度控制
溫度范圍:10°C到150°C
溫度精度:±0.01°C從10°C到100°C;從100°C±0.03°C到100°C
符合ASTM D445溫度敏感性要求的運動粘度測定
電機驅動攪拌器，確保浴溫均勻
微處理器控制的溫度調節和網絡能力
期望的浴溫和校準溫度被數字輸入在面板的鍵盤上
集成微處理器自動調節浴溫
目標和實際浴溫度監控的RTD溫度探測器,不斷顯示在°C或°F在液晶屏幕上
rs - 232和rs - 485通信端口提供數據采集和多單元聯網功能
9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath
For Kinematic Viscosity from 20 °C to 150 °C
ASTM D445/D446, ISO 3104/3105
The microprocessor-controlled CT-2000 series constant temperature bath accommodates viscometer tubes requiring a bath depth up to 12" and provides reliable temperature control from 10 °C to 150 °C. The unit accommodates up to 7 simultaneous viscosity determinations.
Precise and accurate temperature control
- Temperature range: 10 °C to 150 °C*
- Temperature accuracy: ± 0.01 °C from 10 °C to 100 °C; ± 0.03 °C from 100 °C to 150 °C
- Meets ASTM D445 temperature sensitivity requirements for kinematic viscosity determination
- Motor driven stirrer ensures a uniform bath temperature
Microprocessor-controlled temperature regulation & networking capabilities
- Desired bath temperature and calibration temperatures are digitally entered on the front panel keypad
- Integrated microprocessor automatically regulates bath temperature
- Both target and actual bath temperatures are monitored by an RTD temperature probe and continuously displayed in °C or °F on the LCD screen
- RS-232 and RS-485 communication ports provide data acquisition and multi-unit networking capabilities
Efficient, user-friendly design
- Seven glass viscometer ports (each 2” in diameter) and two thermometer ports (each 0.4” in diameter) allow up to 7 simultaneous viscosity determinations**
- Two electric heating elements quickly heat bath media to the selected temperature
- Stainless steel baffle provides a plain reflective viewing background
- Integrated stainless steel cooling coil allows connection to tap or recirculating water chiller for temperatures slightly above or below ambient. An external thermoelectric bath cooler is also available.
- Convenient drawer provides easy access to electrical controls
- Capable of using water or oil as bath medium
9726-A35 Constant Temperature Bath
Safe operation
- Bath thermistor senses over-temperature fault and removes power
- Thermistor disconnection results in removal of bath heater power
- Liquid level sensor prevents operation if bath liquid is not at a safe operating level
Reliable performance
- Well tested CANNON bath platform offers reliability and dependable support
- All wetted components are manufactured from high quality stainless steel or glass
- The heavy duty aluminum frame offers a corrosion-resistant epoxy finish
| Dimensions (W × D × H) | 43.8 cm × 46.4 cm × 58.4 cm (17.3 in × 18.3 in × 23 in) |
| Weight | 51.4 kg (113 lb) |
| Shipping dimensions (W × D × H) | 61 cm × 50.8 cm × 109.2 cm (24 in × 20 in × 43 in) |
| Shipping weight (with all items) | 56.7 kg (125 lb) |
| Temperature range and accuracy | 10 °C to 100 °C, ± 0.01 °C 100 °C to 150 °C ±.03 °C * Test temperatures < 40 °C and high ambient temperature test environments require an optional bath cooler |
| Sample capacity | 7 |
| Bath height | 12 in |
| Bath volume | 17 L (4.5 gal) |
| Operating conditions | 15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2 |
| Electrical specifications | 100 - 130 Vac, 50/60 Hz; 200 - 250 Vac, 50/60 Hz; 1400 watts power consumption |
| Compliance | CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc, 60 sec.); ROHS |
| Data output | RS-232 and RS-485 |
9726-A35 Constant Temperature Bath
