美國進口BriskHeat Flexible玻璃纖維小直徑加熱繩

螺旋纏繞加熱元件將更多的加熱元件加入到每一寸的繩索中。
熱到850ºF(454ºC)只有3 / 16“直徑-理想在狹小空間內加熱
使用此表確定您的應用程序的*線圈間距。例如，要想在120伏的“OD油管”上達到602 F(317C)的zui高溫度，就需要把加圈的間距分別為1 / 4”。
堅固，小直徑的電線加熱小容器或管道，在那里空間對加熱膠帶太有限。Heatglass、陶瓷或金屬。電線適用于實驗室、生產或維護應用。堅硬的，編織的玻璃纖維外護套保護您免受電氣危害。鎳鉻線纏繞在芯上，將更多的加熱元件包入電源線。
控制加溫度與我們的數字感應溫度控制器型號89800 - 02(在右下銷售)或改變240伏交流模型的輸出，可變電壓互感器01575 - 05或- 15。加熱的電線有兩根繩子和10條“引線”。

美國進口BriskHeat Flexible玻璃纖維小直徑加熱繩

Spiral wound heating element-packs more heating element into each inch of cord.

Heat to 850ºF (454ºC)?

Only 3/16" diameter-ideal for heating in tight spaces

Use this table to determine the best coil spacing for you application. For example, to achieve a maximum temperature of 602 F (317C) on a 1" OD tubing at 120 VAC, you need to space the heating coils 1/4" apart.

Rugged, small-diameter cords heat small vessels or tubes where space is too limited for heating tapes. Heatglass, ceramic, or metal. Cords are suitable for laboratory, production, or maintenance applications. A tough, woven fiberglass outer sheath protects you from electrical hazards. NiChrome wire, spiral-wound around the core, packs more heating element into the cord.

Control heating cord temperature with our DIGI-SENSE temperature controller model 89800-02 (sold below right) or vary the output of 240 VAC models with variable-voltage transformers 01575-05 or -15). Heating cords are supplied with two cord ties and 10" leads.

美國進口BriskHeat Flexible玻璃纖維小直徑加熱繩

美國進口BriskHeat Flexible玻璃纖維小直徑加熱繩