Application of Acrel ACR10R Series with AWT100-4G in PV inverters in India
摘要：太陽能是世界上快速增長的能源，也是較容易獲得的可再生能源,采用太陽能向電網輸電不斷增長。同時電網公司通常要求光伏并網系統為不可逆流發電系統，即光伏并網系統所發的電由本地負荷消耗，即自發自用。在并網發電和儲能系統中，由于外部環境是不斷變化的，為了防止光伏并網系統逆向發電，系統需要進行逆流檢測，通過實時監測配電變壓器低壓出口側的功率信號來調節系統的發電功率，從而達到光伏并網系統的防逆流功能。本文介紹了安科瑞 ACR10R與AWT100-4G在印度某泵行業的應用。
Abstract:
Solar energy is a rapidly growing energy source in the world and the most easily available renewable energy source. The market share of the use of solar energy to transmit electricity to the grid is still growing. At the same time, grid companies usually require the photovoltaic grid-connected system to be an irreversible power generation system, that is, the electricity generated by the photovoltaic grid-connected system is consumed by the local load. It is self-generated and used. In the grid-connected power generation and energy storage system, with the external environment is constantly changing, in order to prevent the photovoltaic grid-connected system from generating reverse power, the system needs to perform reverse current detection, and regulate the power generation of the system by real-time monitoring of the power signal on the low-voltage outlet side of the distribution transformer power, so as to achieve the anti-backflow function of the photovoltaic grid-connected system. This article introduces the application of ACREL ACR10R and AWT100-4G in a pump industry in India
1. 項目概述 Project Overview
印度客戶計劃自己生產逆變器。他們需要電表配套逆變器做政府招標項目。他們需要ACR10R來監控工廠設備的用電量，并使用電表合理地檢測每個設備的能耗，同時AWT100-4G使用MQTT協議上傳平臺。
Indian customers plan to produce inverters by themselves. They need inverters and energy meters for government tender. They need ACR10T to monitor the electricity consumption of the plant equipment and use electricity meters to detect the energy consumption of each device effectively. AWT100-4G use MQTT protocol to connect the platform
2. 技術參數Technical Parameters
3.接線&安裝 Wiring & Installation
Figure 1 Meter Shape and installing size （unit：mm）
Figure 2 Wiring Graph
4. 組網拓?fù)鋱DNetwork Topology
5. 現場圖片Installation Site
6.結束語In conclusion
ACR10R具有多種外圍接口功能可供用戶選擇： 帶有RS485通訊接口， 采用MODBUS-RTU協議可滿足通訊聯網管理的需要； 帶開關量輸入和繼電器輸出可實現斷路器開關的“ 遙信" 和“ 遙控" 的功能， 采用LCD顯示界面， 通過面板按鍵來實現參數設置和控制非常適合用液晶顯示器和面板按鈕實現參數的設置和控制的光伏逆變器系統。
ACR10R it has a variety of peripheral interface for user to choose: with RS485 communication interface, MODBUS-RTU protocol can meet the needs of communication network management; The function of “ remote signal" and “ remote control" of circuit breaker switch can be realized with switch quantity input and relay output. The interfaces with switch input and relay output can realize the remote signaling and remote control of the circuit breaker switch. It is very suitable for real-time power monitoring system with an LCD display and the panel buttons to realize the setting and control of parameters for PV inverter system.
參考文獻 Bibliography
1.Solutions for enterprise micro-grid system 2021.04
