1、電腦式材料試驗機機臺結構采用經烤漆處理的硬鋁型材，內置高精度，無間隙雙滾珠螺桿及雙導柱導向，提高了載荷效率和結構剛性。采用全數字交流伺服系統，保證傳動效率高、傳動平穩、低噪音、速度精度可控制在±0.2%以內。

　　1. The structure adopts duralumin stuff after burned lacquer handling, the inner setting were non-gap double balls bearing screws and double oriented standing poles which were high precision; it has a good load efficiency and steady structure. Panasonic digital AC servo system can ensure the driving system to be high efficiency, steady driving, low noise, speed precision which is from﹣0.2% to﹢0.2%.

　　2、電腦式材料試驗機進口PVC材質之伸縮防塵簾，經久耐用、外觀。

　　2. Flexed dustproof curtain made of imported PVC material, wear well and beautiful & top grade.

　　3、進口高精度傳感器，有效測量范圍0.5%～100%F.S，綜合精度優于0.085%。

　　3. Adopt imported high precision transducer, the effective testing range is within 0.5%～100%F.S, the precision is better than 0.085%;

　　4、雙高解析度編碼器測量試樣變形。

　　4. Double high definition coder can test the sample to be anamorphic or not.

　　5、鋁合金型材附以噴塑處理，體現典雅外觀。

　　5. Aluminium alloy stuff and spray molded handling make the appearance more exquisite.

　　6、本公司專業軟體，可完成所有試驗的參數設定、工作狀態控制、資料獲取和處理分析、結果顯示和列印輸出。

　　6. Special software can finish all testing reference setting, controlling of working status and collecting data & analysis, results shown and printing output;

　　7、商用電腦控制，電腦式材料試驗機配置方便靈活;專業測控程序，32位高速資料獲取;可輸出各種數據表格和曲線。

　　7. Business computer controlling, convenient collocations, professional testing program, 32 digits fast speed data procured, all can output various charts and curves.