burkert 6240 A/6活塞電磁閥 返回列表頁

burkert 6240 A/6活塞電磁閥The 6240 valve is a servo-assisted plunger valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The housing design and surface quality enable maximum fl ow rates.burkert 6240 A/6活塞電磁閥 The coils are moulded with chemically resistant epoxy. An optional sliding ring bearings increases the life cycle with dry gases. ‚Kick and Drop‘ electronics are available for over-excitation (plug 2511) and reduced electrical power consumption in operation. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X

特點：

1. 伺服輔助和緊湊活塞閥具有高達DN13直徑
2. 耐振動，重疊線圈系統(tǒng)
3. 增加密封性具有焊接柱塞導向管
4. 安全開硬耦合活塞系統(tǒng)
5. 防爆版本

參數(shù)：

Port connections G 1/4, G 3/8, G 1/2
Orifi ce DN 6.0, DN 12.0
Body material Brass, Stainless steel
Coil material Epoxy
Coil insulation class Class H
Seal material FKM, PTFE/FKM and PTFE/PEEK for high temperature
and high pressure versions (EPDM on request)

Medium
 High temperature version
Neutral gases and liquids, such as e.g. compressed air,
water, hydraulic oil
Steam and hot medium
Viscosity max. 21 mm2/sec
Medium temperature

 FKM
 PTFE/PEEK DN6
 PTFE/PEEK DN12
 EPDM
-10 °C to +140 °C
-40 °C to +180 °C
-40 °C to +140 °C
-30 °C to +120 °C (on request)
Ambient temperature max. 55 °C
Operating voltage 24V DC, 24V/50Hz, 230/50Hz (others on request)
Voltage tolerance ±10%

Duty cycle 100% continuous rating
Electrical connection Tag connector acc. DIN EN 175 301-803 Form A
for cable plug Type 2508
(see ordering chart for accessories)
ATEX/IECEx version with 3 m moulded cable
Protection class IP 65 with cable plug
Weight AC 8W, DC 10W (300g); AC 18W, DC 16W (800g)
Installation As required, preferably with actuator upright