OMB-DAQ-3000數據采集器 美國omega

OMB-DAQ-3000數據采集器 美國omega, 一手貨源,優勢批發,精度高,是優質的記錄儀表, 三：第二步之所以稱“網絡設備"而不稱電腦的網絡口或交換機的網絡口是因?yàn)檫@兩種設備都可使用，希望用戶一定要成功做完本步驟再做下步驟，不要跳步驟： 將采集設備和LTM8901系列的工作電源都接上，再和多

 

OMB-DAQ-3000數據采集器 美國omega

1-MHz、16-位USB數據采集模塊
OMB-DAQ-3000 Series
CE OmegaCare
1-MHz、16-位USB數據采集模塊
OMB-DAQ-3000 Series:1-MHz、16-位USB數據采集模塊
OMB-DAQ-3005
MHz，16位多功能USB模塊
同步模擬輸入，模擬輸出，數字I / O，和計數器/定時器，I / O
8分或16個單端模擬輸入（軟件選擇每通道）
熱電偶或電壓對任何模擬通道輸入
用戶可擴展至64se / 32de模擬輸入，包括熱電偶測量
高達四MHz的16位，模擬輸出
24高速數字I / O線
四個32位計數器輸入通道正交編碼能力
低延遲的控制輸出能力（低至2μ的延遲）軟件
包括即時建立daqview軟件，實時觀察，記錄數據的頻域分析，與Windows Vista兼容
Visual Studio Visual Studio支持。網，包括Visual C + +的例子，# Visual C++，Visual Basic和Visual Basic。網
對于DASYLab與LabVIEW綜合驅動程序
為方便用戶校準daqcal軟件中的應用
The New OMB DAQ 3000系列提供高速、多功能數據采集在低成本，便攜包。the模塊提供同步和并行輸入電壓，溫度輸入，波形輸出，對輸入正交編碼的輸入，輸出，數字I / O定時器和一切需要開始收購，觀察和儲存data is included with the OMB DAQ 3000系列，包括全面的軟件支持。the OMB DAQ 3000特征有16位/ 1 MHz的A / D轉換器，模擬輸入通道16用戶可膨脹至64 up to爐/ 1 MHz的16位模擬輸出，24高速數字I / O 2 32位定時器輸出與爐counters。所有的模擬I / O，數字I / O，和計數器/定時器，I / O操作可以同時synchronously and guaranteeing確定性，I / O among all信號類型。單to the OMB DAQ - 3000是低等待，高度確定性控制輸出的模式，工廠工作independent of the PC。在這個模式下，數字，模擬和定時器輸出ADC respond to模擬，數字和計數輸入，快2μ，至少比其他快1000時報制品that rely on the PC for Decision Making
軟件
included with the OMB DAQ - 3000是新daqview軟件，全面應用，支持建立，數據和實時數據記錄觀察不需要任何編程技能。可選的OMB - daqview Pro軟件adds features such as直接到Excel enhancements，F(xiàn)FT分析，統計等。All for小額外的價格。also included with the OMB DAQ - 3000是完整的和詳細的抽樣方案set of drivers for thezui流行的編程語言和軟件包。驅動程序支持包括Visual Basic，C / C + +，LabVIEW與DASYLab?；贏ctiveX daqcom提供Windows / COM編程工具對基于Microsoft Visual Studio和Visual Studio .net.C 2
模擬輸入
the OMB DAQ 3000有16位A / D，1 MHz的單端輸入耦合以及16、8微分模擬輸入，差動熱電偶輸入8金。七軟件可編程輸入from±10 V to provide把±100 MV全尺度。每個頻道can be軟件構型for不同范圍，as well as for單端或差雙極輸入，或熱電偶輸入?；旌蟨gia on the OMB DAQ - 3000是可以保證解決to the specified精度而操作at the full 1 msample / s的脾臟。每個模擬輸入on the OMB DAQ三千金on the OMB - pdq30擴展選項可以接受熱電偶（TC）輸入。內置冷結傳感器are provided for each of the可移動的螺絲終端連接器，and any TC型can be attached to any頻道。當測量TCS，the OMB DAQ 3000年以上工廠工作在采樣模式，在解釋我們每個TC采取多頻道數字過濾，冷結補償和converted to溫度。as a result，離子通道的TCS attached are at a脾臟仔細測量了50赫茲至10千赫depending on how much is selected超采樣。in line周期抑制模式，發生在一個超采樣周期of either 50Hz金60赫茲，提供高水平抑制50Hz金60赫茲。

Analog Channel Expansion
Adding additional analog input channels for the OMB-DAQ-3000 is easy using the optional OMB-PDQ30 expansion module. The OMB-PDQ30 connects to the OMB-DAQ-3000 by either plugging directly into the expansion connector or via a cable (OMB-CA-96A) if distance is required between the two units. The OMB-PDQ30 provides an additional 48SE/24DE analog inputs or 24 differential thermocouple inputs, software-configured on a per-channel basis. The total channel capacity with a OMB-PDQ30 attached is 64 single-ended or 32 differential inputs. The measurement speed of OMB-PDQ30 channels is the same 1 Msample/s as with the OMB-DAQ-3000 channels. When configured to measure thermocouple channels, the system sample rate is typically 50 Hz to 10 kHz per channel. This reduction in sample rate ensures that temperature measurements are accurate, low noise and stable.
Synchronous I/O
The OMB-DAQ-3000 can make analog measurements and read digital and counter inputs, while synchronously generating up to four analog outputs as well as digital pattern outputs. Digital and counter inputs do not affect the overall A/D rate because they use no time slot in the scanning sequencer.
Input Scanning
The OMB-DAQ-3000 has several scanning modes to address a wide variety of applications. A 512-location scan buffer can be loaded by the user with any combination of analog input channels. All analog input channels in the scan buffer are measured sequentially at 1 μs per channel. The user can also specify that the sequence repeat immediay or repeat after a programmable delay, from 0 to 19 hours, with 20.83 ns resolution. In either of the two synchronous modes, the digital inputs and/or counter inputs are read with deterministic time-correlation to the analog inputs. In the once-per-scan mode, all of the enabled digital inputs and counter inputs are read during the first analog measurement of an analog input scan sequence. The advantage of this mode is that the digital and counter inputs do not consume an analog input time slot and therefore do not reduce the available bandwidth for analog input measurements.
Output Timing
The digital and analog outputs on the OMB-DAQ-3000 can be updated asynchronously or synchronously in several modes. In asynchronous mode, digital and analog outputs can be updated before, during or after an analog input sequence. The maximum update rate in this mode is non-deterministic and is entirely dependent on the PC processor speed, the operating system and programming environment. In synchronous output modes, outputs can be updated continuously from the PC or in response to an input from an analog channel, digital channel or counter channel. When updated from the PC, the user can specify the rate at which the output is updated in 20.83 ns intervals. Outputs are updated synchronously at a maximum rate of 1 μs.
Analog Output (OMB-DAQ-3000 and 3001 Only)
Two or four 16-bit, 1-MHz analog output channels are built into the OMB-DAQ-3000 with an output range from -10 V to +10 V. The maximum rate at which analog outputs can be updated depends on several factors, including the speed of the USB port. Typically, with the A/D operating at full 1 Mreading/s rates, one analog output can be updated continuously from PC memory at 1 MHz, or two analog outputs at 500 kHz or four analog outputs at 250 kHz.
Digital I/O
Twenty-four TTL-level digital I/O lines are included in the OMB-DAQ-3000. Digital I/O can be programmed in 8-bit groups as either inputs or outputs and they can be scanned in several modes (see Input Scanning). Ports programmed as inputs can be part of the scan group and scanned along with analog input channels, or they can be asynchronously accessed via the PC at any time, including when a scanned acquisition is occurring. Two synchronous modes are supported when scanned along with analog inputs. In one of these modes, digital inputs are scanned at the start of each scan sequence, which means the rate at which they are scanned is dependent on the number of analog input channels and the delay period. If no analog inputs are being scanned, the digital inputs can be scanned at up to 12 Msamples/s. The low-latency digital output mode allows a digital output to be updated based on the level of an analog, digital or counter input. In this mode, the user associates a digital output bit with a specific input and specifies the level of the input where the digital output changes state. The response time in this mode depends on the number of input channels being scanned and can typically be in the range of 2 to 6 μs.
Pattern Generation
Two of the 8-bit ports can be used to generate a 16-bit digital pattern at up to 1 MHz. The digital pattern can be read from PC RAM or a file on the hard disk. Digital pattern generation is clocked in the same four modes as was described withanalog output.
Counter Inputs
Four 32-bit counters are built into the OMB-DAQ-3000. Each will accept frequency inputs of up to 20 MHz, and each counter channel can be configured in a variety of modes, including counter, period, pulse width, time between edges, or multi-axis-quadrature encoder. The counters can concurrently monitor time periods, frequencies, pulses, and other event-driven incremental occurrences from encoders, pulse generators, limit switches, proximity switches, and magnetic pick ups. As with all other inputs to the OMB-DAQ-3000, the counter inputs can be read asynchronously under program control, or synchronously as part of an analog and digital scan group based either on an internal programmable timer or on an external clock source. The OMB-DAQ-3000 supports quadrature encoders with up to 2 billion pulses per revolution, 20 MHz input frequencies, and x1, x2, x4 count modes. With only A phase and B phase signals, 2 channels are supported. With A phase, B phase, and Z index signals, 1 channel is supported. Each input can be debounced from 500 ns to 25.5 ms (total of 16 selections) to eliminate extraneous noise or switch-induced transients. Encoder input signals must be within -15 V to +15 V and the switching threshold is TTL (1.3 V).
Timer Outputs
Two 16-bit timer outputs are built into the OMB-DAQ-3000, each capable of generating different square waves with a programmable frequency range from 16 Hz to 1 MHz.
Specifications
(GENERAL)
ENVIROMENT:
Operating Temperature: -30 to 70°C (-54 to 158°F)
Storage Temperature: -40 to 80°C (-40 to 176°F)
Relative Humidity: 0 to 95% non-condensing
Communications: USB 2.0 high-speed mode (480 Mbps), if available, otherwise USB1.1 full-speed mode (12 Mbps)
Acquisition Data Buffer: 1 MSample
Vibration: MIL STD 810E category 1 and 10
Signal I/O Connector: 6 banks of removable screw-terminal blocks
EXTERNAL POWER:
Connector: Switchcraft# RAPC-712
Power Range: 6 to 16 VDC (used when USB port supplies insufficient power, or when an independent power supply is desired)
Over Voltage: 20 V for 10 seconds, max
Expansion Connector: 25-pin DSUB, female
Dimensions: 269 W x 92 D x 45 mm H (10.6 x 3.6 x 1.6")
Weight: 431 g (0.95 lb)
ANALOG INPUTS
Channels: 16 single-ended or 8 differential, programmable on a per-channel basis as single-ended or differential
Expansion: An additional 48 analog inputs per board via optional OMB-PDQ30 module; expansion channels have identical features as the main board channels
Expansion Connector: 25-pin, DSUB, female
Over-Voltage Protection: ±30 V without damage
Voltage Measurement Speed: 1 μs per channel
Temperature Measurement Speed: Programmable from 100 μs to 20 ms per channel Ranges: Software or sequencer selectable on a per-channel basis, ±10 V, ±5 V, ±2 V, ±1 V, ±0.5 V, ±0.2 V, ±0.1 V
Input Impedance: 10M Ω single-ended; 20 M .differential
Total Harmonic Distortion: -80 dB typical for ±10 V range, 1 kHz fundamental
Signal-to-Noise and Distortion: 72 dB typ for ±10 V range, 1 kHz fundamental
Bias Current: 40 pA typical (0 to 35°C)
Crosstalk: -75 dB typical DC to 60 Hz; -65 dB typical @10 kHz
Common Mode Rejection: -70 dB typical DC to 1 kHz
A/D SPECIFICATIONS
Type: Successive approximation
Resolution: 16-bit
Maximum Sample Rate: 1 MHz
Nonlinearity (Integral): ±2 LSB maximum
Nonlinearity (Differential): ±1 LSB maximum
INPUT SEQUENCER
Analog, digital and frequency inputs can be scanned synchronously, based on either an internal programmable timer or an external clock source. Analog and digital outputs can be synchronized to either of these clocks.
Scan Clock Sources: 2
Note: The maximum scan clock rate is the inverse of the minimum scan period. The minimum scan period is equal to 1 μs times the number of analog channels. If a scan contains only digital channels then the minimum scan period is 250 ns.
1. Internal, programmable
Analog channels from 1 μs to 19 hours in 20.83 ns steps; digital channels and counters from 83.33 ns to 19 hours in 20.83 ns steps
2. External, TTL level input Analog channels down to 1 μs min digital channels and counters down to 83 ns min
Programmable Parameters per Scan: Channel (random order), gain
Depth: 512 locations
On-Board Channel-to-Channel Scan Rate: Analog - 1 MHz maximum Digital - 4 MHz if no analog channels are enabled, 1 MHz with analog channels enabled
EXTERNAL ACQUISITION SCAN CLOCK INPUT
Maximum Rate: 1.0 MHz
Clock Signal Range: Logical zero 0 V to 0.8 V; logical one 2.4 V to 5.0 V
Minimum Pulse Width: 50 ns high, 50 ns low
ANALOG OUTPUTS (OMB-DAQ-3000 and 3001 only) Analog output channels are updated synchronously relative to scanned inputs, and clocked from either an internal on-board clock or an external clock source. Analog outputs can also be updated asynchronously, independent of any other scanning in the system. Streaming from disk or memory is supported, allowing continuous, nearly infinite-length waveform outputs (limited only by available PC system resources).
Channels: OMB-DAQ-3000, 2; OMB-DAQ-3001, 4
Resolution: 16-bits
Data Buffer: PC-based memory
Output Voltage Range: ±10 V
Output Current: ±1 mA; sourcing more current ( 1 mA to 10 mA) may require OMB-TR-2 power adaptor)
Offset Error: ±0.0045 V max
Digital Feedthrough: <10 mV when updated
DAC Analog Glitch: <12 mV typical at major carry
Gain Error: ±0.01%
Update Rate: 1 MHz max, 19 hrs min (no minimum with external clock), resolution 20.83 ns, 250 kHz if all 4 DACs enabled
Settling Time: 2 μs to rated accuracy
Clock Sources: 4, programmable
1. On-board D/A clock, independent of scanning input clock
2. Onboard scanning input clock
3. External D/A input clock, independent of external scanning input clock
4. External scanning input clock
DIGITAL I/O
Channels: 24 Ports: 3 x 8 bit, each port is programmable as input or output
Input Scanning Modes: 2 programmable
1. Asynchronous, under program control at any time relative to input scanning
2. Synchronous with input scanning Input Characteristics: 10K .pull up to 5 V, 20 pF to common
Input Characteristics: 220 Ω series resistor, 20 pF to common
Input Protection: ±15 kV ESD clamp diodes
Input Levels: Low: 0 to 0.8 V; High: 2.0 V to 5.0 V
Output Levels: Low: <0.8 V; High: >2.0 V
Output Characteristics: Output 1.0 mA per pin
Sampling/Update Rate: 4 MHz max
PATTERN GENERATION OUTPUT
Two of the 8-bit ports can be configured for 16-bit pattern generation. The pattern can also be updated synchronously with an acquisition at up to 1 MHz.
COUNTER
Each of the four high-speed, 32-bit counter channels can be configured for counter, period, pulse width, time between edges or multi-axis quadrature encoder modes. Counter inputs can be scanned synchronously along with analog and digital scanned inputs, based on an internal programmable timer or an external clock source.
Channels: 4 x 32 bit
Input Frequency: 20 MHz max
Input Signal Range: -15 V to 15 V
Input Characteristics: 10K Ω pull up, ±15 kV ESD protection
Trigger Level: TTL
Minimum Pulse Width: 25 ns high, 25 ns low
Debounce Times: 16 selections from 500 ns to 25.5 ms; positive or negative edge sensitive; glitch detect mode or debounce mode
Time Base Accuracy: 50 ppm (0° to 50°C)
Five Programmable Modes: counter, period, pulsewidth, timing, Encoder
Counter Mode Options: Totalize, clear on read, rollover, stop at all Fs, 16- or 32-bit, any other channel can gate or decrement the counter
Period Mode Options: Measure x1, 10, 100 or 1000 periods, 16-or 32-bit; 4 different time bases to choose from: 20.83 ns, 208.3 ns, 2.083 μs, 20.83 μs, any other channel can gate the period measurement
Pulsewidth Mode Options: 16- or 32-bit values; 4 different time bases to choose from: 20.83 ns, 208.3 ns, 2.083 μs, 20.83 μs, any other channel can gate the pulsewidth measurement
Timing Mode Options: 16- or 32-bit values; 4 different time bases to choose from: 20.83 ns, 208.3 ns, 2.083 μs, 20.83 μs
Encoder Mode Options: x1, 2, 4 options, 16- or 32-bit values, Z-channel clearing of counter, any other channel can gate the counter
Multi-Axis Quadrature Encoder Inputs: 1 channel with A (phase), B (phase) and Z (index); 2 channel with A (phase) and B (phase); x1, x2 and x4 count modes; single-ended TTL
FREQUENCY/PULSE GENERATORS
Channels: 2 x 16-bit
Output Waveform: Square wave
Output Rate: 1 MHz base rate divided by 1 to 65,535 (programmable)
High-Level Output Voltage: 2.0 V min @ -1.0 mA; 2.9 V min @ -400 μA
Low-Level Output Voltage: 0.4 V max @ 400 μA

產品型號 產品描述
OMB-DAQ-3005 16-bit, 1-MHz USB data acquisition module with 16 analog inputs, 24 digital I/O, four counters, and two timers; includes DaqView software, support for Visual Studio and Visual Studio .NET, with examples for Visual C++, Visual C#, Visual Basic and Visual Basic .NET; drivers for DASYLab and LabVIEW; DaqCal software application.
OMB-DAQ-3000 Same as OMB-DAQ-3005 but with two 16-bit, 1-MHz analog outputs
OMB-DAQ-3001 Same as OMB-DAQ-3005 but with four 16-bit, 1-MHz analog outputs
OMB-PDQ30 Analog input expansion module, adds 48SE/24DE channels to OMB-DAQ-3000 Series
OMB-CA-96A OMB-DAQ-3000 Series to OMB-PDQ30 cable, 0.6 m (2')
OMB-CA-179-1 USB cable, 1 m (3')
OMB-CA-179-3 USB cable, 3 m (10')
OMB-CA-179-5 USB cable, 5 m (16')
OMB-CN-153-12 Spare terminal block
OMB-TR-2U External power supply
OMB-PDQ10 DIN rail mounting adaptor for OMB-DAQ-3000

注釋：每個omb-daq-3000系列模塊提供daqview軟件，需要的軟件驅動程序和USB電纜光盤*操作手冊（單獨訂購）。
訂購示例：（1）omb-daq-3005 16位，16 MHz的USB數據采集模塊的模擬量輸入，24個數字I / O，四位計數器，和兩個定時器；包括daqview軟件，Visual Studio Visual Studio支持。凈，用Visual C++的例子，# Visual C++，Visual Basic和Visual Basic。網；為DASYLab與LabVIEW驅動程序；daqcal軟件中的應用，

 OMB-DAQ-3000數據采集器 美國omega

衍生閱讀:，或者無法區分實驗失敗是產品問題還是接線問題。因此，請不要修改產品設置，只做產品的連線工作，否則欲速則不達。 二：產品的聯線十分簡單，一根電源線，一根數據線，一根接地，同一條總線上可掛接多個溫濕度傳感器，數字量輸出。 三：第二步之所以稱“網絡設備”而不稱電腦的網絡口或交換機的網絡口是因?yàn)檫@兩種設備都可使用，希望用戶一定要成功做完本步驟再做下步驟，不要跳步驟： 將采集設備和LTM8901系列的工作電源都接上，再和多功能數據采集器M9600(或者LTM8662)用屏蔽雙絞線連接上，根據現場環境選擇輸出，RS-485，以太網，zigbee，gprs或者CDMA等都可以。 四：用一臺電腦或者工控機，運行ENVIEW軟件，輸入注冊碼等即可實時觀看溫濕度數據，是是溫濕度曲線，歷史溫濕度數據，歷史溫濕度曲線，還可設置溫濕度上下限，如果同時接入短信報警系統LTS-Enview-SMS，可實現短信報警或者鈴聲報警，同時還可以隨時查看現場環境參數。 五.根據用戶的需要，整個
相關產品：

產品管理