ACO-T602自動開口閃點試驗儀為臺式六聯結構,能嚴格按照克利夫蘭開口杯法(COC)測試石油產品的開口閃點。尤其適用于大量的和要求連續測試的場合,能有效的提高試驗室的工作效率。
克利夫蘭開口杯
自動開口閃點試驗儀
ACO-T602
Simplest & Easiest Operation
Model ACO-T602 automatically carries out Cleveland Open Cup (COC) flash point test of up to 6 samples continuously. For large sample numbers, this carrousel model reduces the burden on the laboratory personnel.
ACO-T602自動開口閃點試驗儀為臺式六聯結構,能嚴格按照克利夫蘭開口杯法(COC)測試石油產品的開口閃點。尤其適用于大量的和要求連續測試的場合,能有效的提高試驗室的工作效率。
HIGHER LAB PRODUCTIVITY: The programmable 6-position carrousel improves COC test throughput drastically. 儀器在一個旋轉托盤上設置了六個油杯,自動旋轉切換,依次測試。
EASY PROGRAMMING: Up to 12 types of sample data can be stored and later recalled for quick and easy programming. 可獨立設置樣品的測試模式,預期閃點。在試驗過程中,不需要中斷整個試驗過程,就可以人為更換測試/未測試樣品,設定新的試驗參數,zui多可儲存12組獨立測試模式和數據。
ELECTRIC IGNITION: Reliable and easy-to-handle electric Ignitor is employed. Two pieces of coiled heater are placed near the sample cup rim. The ignitor has an extended period of life. 儀器使用電弧點火引燃樣品的燃燒,閃點檢測效果很好,點火頭使用壽命也很長。
INNOVATIVE FLASH DETECTOR*: Ionization between the sample cup rim and either of the two electric igniters is detected as a flash occurs. The proven ionization method ensures highly reliable flash detection. Since the electric heater cleans by itself, the need for messy cleaning of ionization detector is minimized. *: Patent No. 2610000 (’94 Japan) and No.5834630 (’98 USA)
*的電弧點火和閃點檢測傳感器一體式設計,檢測靈敏度高,檢測結果準確,維護簡單,清洗方便,已經獲得了日本和美國的保護。
QUICK COOLING AFTER TEST: High velocity air cooling minimizes the waiting time between tests. The next test cycle is proceeded upon reaching a predetermined cooling time. 當一個樣品測試完成后,自動控制系統會對油杯進行強力風冷,能迅速降低油品和油杯到室溫,便于2次重復測試。
AUTO FIRE CONTAINMENT: ACO-T602 is equipped with a fire containment lid which activates automatically to help putting out fire when ACO-T602 detects specimen is burning up heavily. (相比較于ACO-T601,)ACO-T602配備有自動滅火蓋,簡單實用,可在測試樣品的燃點后自動滅火。作為儀器安全措施的一部分,自動滅火系統也有效的避免了測試中引起火災的意外情況。
DATA HANDLING: The unit is equipped to store up to 50 successive test results and export to the printer or to a LIMS through an RS232 port. 儀器可記錄zui后50 次的試驗數據,內置電池,即使關機數據也不會丟失。還可以通過RS-232外接打印機輸出,或同實驗室信息管理系統(LIMS)通訊,便于集中控制管理。
TANAKA Automatic Cleveland Open Cup Flash Point Tester, model ACO-T602
SPECIFICATIONS:
RELATED STANDARDS: (適用標準)
ISO 2592, ASTM D92, IP 36, GB/T 3536 etc.
MEASURING RANGE: (測試范圍)
Ambient to 400 ℃ ( 室溫 - 400℃)
TEST MODE: (測試模式)
ASTM D92 Flash, 閃點
Flash + Fire Fire point must be visually monitored 閃點+燃點檢測。燃點檢測有一定的危險性,必須有人員在場的情況下,才能進行。
DISPLAY: (顯示)
Fluorescent display tube (VFD module) VFD熒光顯示屏
PRINTER: (打印)
Thermal type printer (provided) (標準附件)外接熱敏打印機
TEMPERATUR SENSOR: (溫度傳感器)
PT-100 in stainless steel sheath (不銹鋼護套PT-100傳感器)
FLASH DETECTION: 閃點檢測
Ionization between test cup and igniters (Patented)火焰離子檢測(技術)
HEATER: 加熱功率
Nichrome Coil heater: 1kW@100V or 1.2kW@220V 鎳鉻合金加熱盤組件
IGNITION SOURCE: (點火)測試方式
Dual Electric Igniters (platinum coil) 雙鉑金電極(環),電子點火
COOLING DEVICE:
Forced air cooling by sirocco fan (試驗結束)強制風冷
BAROMETRIC CORRECTION: 氣壓補正
By entering the barometric pressure reading through the control panel or fully automatic correction with an optional barometric pressure sensor可在儀器的設置面板中設定大氣壓力數值,儀器自動計算并補正zui終的試驗結果。或加裝氣壓檢測傳感器(選購件),儀器自動采集大氣壓力數值并計算補正試驗結果。
DATA OUTPUT: 數據輸出
RS-232C 1 channel RS-232C 接口,1
SAFETY MECHANISM: (安全保護)
Fire containment lid which activates automatically to help putting out fire when ACO-T602 detects a specimen is burning up heavily. If flash is not detected until the temperature reaches EFP+30 ℃ or 400 ℃, the test is terminated and cooling starts. Automatically shuts off and the problem is reported by buzzer and display, in case:
ACO-T602配備有自動滅火蓋,簡單實用,可在測試樣品的燃點后自動滅火。作為儀器安全措施的一部分,超過預期閃點值30 ℃未檢測出閃點,或超過了檢測范圍(400 ℃)時,儀器自動關機,報警提示,并顯示相關出錯信息。燃點測試模式或意外火警時,自動滅火蓋能在*時間滅火動作:也有效的避免了測試中引起火災的意外情況。
(a) Temperature sensor is found defective, 溫度檢測傳感器出錯時
(b) Flash detector is found defective, 閃點檢測傳感器出錯時
(c) Thermofuse is blown (Also fire containment lid activates),
溫度保險絲熔斷或執行滅火動作時
(d) Built-in battery is found drained out, 內置電池失效時
(e) Upper arm switch is found defective, 測試臂不能上升
(f) Lower arm switch is found defective, 測試臂不能下降
(g) Shutter open/close switch is found defective, or
(h) Control computer runs away (no display) 微處理器失效(無顯示)
DIMENSION & WEIGHT: (體積/重量)
控制部,Control unit: 230W x 455D x 110H (mm), 6kg
測試部,Test unit: 405W x 515D x 400H (mm), 33kg
打印機,Printer: 134W x 180D x 58H (mm), 0.6kg
INSTALLATION SITE: 環境要求
Ambient temperature: 0 to 40 ℃ 環境溫度 0 - 40 ℃
RH: Less than 90%(no condensation) 環境濕度 < 90% (無凝結)
POWER SUPPLY: 電源要求,訂購前說明
Single Phase AC100/120V or 220/240V 50/60Hz, (set at the factory) 1.7kW(max.),
One line must be grounded. 必須有可靠接地
ORDERING INFORMATION:
STANDARD ACCESSORIES: (標準附件)
1. Test Cup樣品杯,克利夫蘭開口杯 | 6pcs |
2. Tong 油杯夾鉗 | 1pc |
3. Power Connecting Cable, 0.6m電源連接線 | 1pc |
4. Signal Connecting Cable, 0.6m信號連接線 | 1pc |
5. AC Power Cord, 3.0m ( | 1pc |
6. Thermal Insulation (Heating Plate) 隔熱片,保溫板 | 6pcs |
7. Spare Electric Ignitor 電子點火頭備件 | 2pcs |
8. Spare Insulating Collar for Ignitor點火用絕緣環備件 | 2pcs |
9. Spare Thermofuse (pack of 3, w/insulating tube) 溫度保險絲備件 (3個/包,帶護套) | 1pk |
10. Printer, BS2-80TS with AC Adapter and Connecting Cable, 1.0m 打印機,帶電源和連接線 | 1set |
11. Printing paper 打印紙 | 1pc |
12. Instruction Manual使用說明書 | 1copy |
OPTIONAL ACCESSORIES: (選購件1)
Barometric Pressure Sensor大氣壓力檢測傳感器
Power Connecting Cable, 3m加長電源連接線,3米
Signal Connecting Cable, 3m加長信號連接線,3米
SUGGESTED SPARES FOR 2 YEARS: (選購件2,2年維護)
1 Electric Ignitor電子點火頭 | 10pcs |
2 Insulating Collar for Ignitor 點火用絕緣環 | 10pcs |
3 Thermofuse (pack of 5, w/insulating tube) 溫度保險絲(5個/包,帶護套) | 1pk |
4 Printing Paper打印紙 | 10pcs |
5 Temperature Sensor溫度傳感器 | 1pc |
6 Nichrom Heater Coil 1kW@100V or 1.2kW@220V加熱組件 | 1pc |