HST-X04掃查器

奧林巴斯HST-X04掃查器

奧林巴斯HST-X04飛行時間衍射(TOFD)手動掃描儀提供了一個高效，低成本，多功能的焊縫檢測解決方案。

應用程序

•手動部署單軸掃描儀，用于板材、管道和曲面

•適用于管道、壓力容器、儲罐和結構件

•可在任何方向操作，無論是在平面上還是在51毫米(2英寸)以下的管道上。OD。

數據采集

•記錄的結果與OmniScan®

•理想的位置相關的a掃描，b掃描，和回聲動態掃描數據收集

•適用于任何有兩個UT通道的系統

掃描工具組件

•掃描儀與150毫米幀

•兩個10mhz(3毫米元件直徑)CentraScan™復合TOFD探頭，比傳統UT探頭的信噪比有所提高

•三套相約楔形與硬質合金穿針和灌溉洞45º,60º,70º操作

•兩個LEMO®-Microdot®傳感器電纜2.5米長

•兩個羅曼蘭®成了bnc適配器

•彈簧加載、摩擦驅動和防水的微型輪式編碼器，用于x軸或y軸數據編碼

•靈活的編碼器定位支架

•額外的250毫米框架更廣泛的探針中心分離

•有小泡沫墊的手提箱

該HST-X04掃描儀套件可以進一步配置，以適應廣泛的奧林巴斯TOFD和脈沖回波探頭和楔形，包括復合產品線。

可選的前置放大器工具包

奧林巴斯HST-X04掃查器

零件號:5682 - kit01

Panametrics 5682前置放大器套件包括:

•5682年前置放大器

•2.5 - m LEMO-LEMO電纜

•電力電纜

•9 V電池

•帶情況

前置放大器操作與標準 9 V電池或插入OmniScan®提供電力電纜。

The Olympus HST-X04 time-of-flight diffraction (TOFD) manual scanner offers an efficient, low-cost, and versatile weld inspection solution.

Applications

• Manually deployed single-axis scanner for use on plate, pipe, and curved surfaces
• Applicable to pipes, pressure vessels, storage tanks, and structural components
• Operates in any orientation, either on flat surfaces or on pipes up to 51-mm (2 in.) OD.

Data acquisition

• Permanent record of the results with the OmniScan®
• Ideal for position-related A-scan, B-scan, and echo-dynamic scan data collection
• Suitable for any system with 2 UT channels

Scanner Kit Components

• Scanner with 150-mm frame
• Two 10-MHz (3-mm element diameter) CentraScan™ composite TOFD probes offering signal-to-noise ratio improvement over conventional UT probes
• Three sets of ST1 wedges with carbide wear pins and irrigation holes for 45º, 60º, and 70º operation
• Two LEMO®-Microdot® transducer cables 2.5m long
• Two LEMO®-to-BNC adapters
• Spring-loaded, friction-driven, and water proof Mini-Wheel encoder for X-axis or Y-axis data encoding
• Brackets for flexible encoder positioning
• Additional 250-mm frame for wider probe center separation
• Foam-padded carrying case

This HST-X04 Scanner kit can be further configured to fit the broad range of Olympus TOFD and pulse-echo probes and wedges, including the composite product line.

Optional Preamplifier Kit

Part number: 5682-KIT01

The Panametrics 5682 preamplifier kit includes:

• 5682 preamplifier
• 2.5-m LEMO-LEMO cable
• Power cable
• 9?V battery
• Belt case

Preamplifier operates with standard 9?V battery or plugged to OmniScan® with supplied power cable.

Preamplifier specifications

• 30?dB gain
• 50? hours of battery life (continuous discharge)
• Continuous power-level indicator
• 67?dB signal-to-noise ratio
• Weight: 180 g (6.4 oz) with battery
• CE-certified