資料下載
BURKERT二位二通膜片閥0262系列選型資料
閱讀:708 發布時間:2017-9-8提 供 商 | 寶德氣動(上海)有限公司 | 資料大小 | 124.5KB |
---|---|---|---|
資料圖片 | 查看 | 下載次數 | 160次 |
資料類型 | PDF 文件 | 瀏覽次數 | 708次 |
免費下載 | 點擊下載 |
BURKERT膜片閥0262系列技術參數:
Body material | Brass, stainless steel |
Inner part valve | Stainless steel |
Actuator | Epoxy resin |
Seal material | NBR, FKM, PTFE/FKM, EPDM, PTFE/EPDM |
Medium |
|
NBR | neutral medium |
| (e.g. compressed air, town gas, water, hydraulic oil) |
FKM | per-solution, oxygen, hot air |
EPDM | oil and fat-free medium |
| e.g. hot water, alkaline washing and bleaching lyes |
PTFE/EPDM | oil and fat-free medium, e.g. hot water and steam |
(PFTE seal with EPDM O-Ring) |
|
PTFE/FKM | hot oils, hydrocarbonated water, aromatics and steam |
(PTFE seal with FKM O-Ring) |
|
Viscosity | max. 100 mm2/s |
Medium temperature |
|
NBR | -10 up to + 90 ºC |
FKM | -10 up to +100 ºC |
EPDM | -10 up to +100 ºC |
PTFE/EPDM | -10 up to +140 ºC |
PTFE/FKM | -10 up to +140 ºC |
Control medium | neutral gases and liquids, in particular air, |
| water, hydraulic liquids up to max. +90 ºC |
Pilot pressure | see diagram |
Ambient temperature | -10 up to +90 ºC |
Installation | As required, preferably with actuator upright |
Flow rate | measured at +20°C, 1 bar pressure at valve inlet |
Kv value water [m3/h]: | and free outlet |
Pressure values [bar] | Measured as overpressure to the atmospheric pressure |
Response times [ms]: | Measured at valve outlet at 6 bar and +20ºC. |
Opening | Pressure relief 0 90% |
Closing | Pressure drop 100 to 10% |