氟氣HF氣體檢測管156S HYDROGEN FLUORIDE 0.17-30ppm 返回列表頁

氟氣HF氣體檢測管156S HYDROGEN FLUORIDE 0.17-30ppm

Tube 56S

1. PERFORMANCE
1） Measuring range ：0.5-30 ppm 0.25-15 ppm
Number of pump strokes 3（300ml） 6（600ml）
2） Sampling time ：1 minute/1 pump stroke
3） Detectable limit ：0.2 ppm（300ml）
4） Shelf life ：3 years
5） Operating temperature ：0～40℃
6） Temperature compensation ：Necessary（See "TEMPERATURE CORRECTION TABLE"）
7） Reading ：Direct reading from the scale calibrated by 3 pump strokes
8） Colour change ：Greenish yellow→Pink
2. RELATIVE STANDARD DEVIATION
RSD-low：10％　RSD-mid.：10％　RSD-high：10％
3. CHEMICAL REACTION
PH indicator is discoloured by Hydrogen fluoride.
4. CALIBRATION OF THE TUBE
PERMEATION TUBE METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
GAS To pump
1
0.5
5
10
15
20
25
30
300ml
ppm

????
156S HYDROGEN FLUORIDE
Substance Interference Coexistence
Chlorine FIG.1 Similar stain is produced. Higher readings are given.
Hydrogen chloride FIG.2 〃〃
（NOTE）
1）This detector tube is affected by ambient temperature and humidity,therefore, it is necessary to compensate
the reading of gas detector tube with the following equation and correction coefficient table.
Actual concentration＝Reading Value×Correction Coefficient
2）In case of 6 pump strokes, following formula is available for the actual concentration.
Actual concentration＝1/2×Temp./R.H. corrected value
0
30
40
20
10
Chlorine〔ppm〕?
FIG.1 Influence of Chlorine
Hydrogen fluorine
indicating value 〔ppm〕
2 4 6 8 10 0
30
40
20
10
Hydrogen chloride〔ppm〕?
FIG.2 Influence of Hydrogen chloride
Hydrogen fluorine
indicating value 〔ppm〕
10 20 30
TEMP./R.H.CORRECTION COEFFICIENT TABLE
Relative Temperature
Humidity 0℃ 10℃ 20℃ 30℃ 40℃
（％） （32°F） （50°F） （68°F） （86°F） （104°F）
30 0.9 0.7 0.6 0.55 0.5
40 1.6 1.0 0.8 0.65 0.6
50 2.6 1.3 1.0 0.7 0.7
60 － 2.2 1.5 1.1 0.8
70 － － 2.7 1.6 0.9
80 － － － 2.9 1.1