雙層棒條閥棒條閘門

雙層棒條閥棒條閘門根據建材、礦山、冶金等行業中對中、小固體塊狀物料的給料、輸送、控制等工藝的要求而研制的一種新型閥門，適用于 ≤ 50mm 物料的輸送控制。

This series valve is the new type valve designed according to the technologic request of feeding, carrying and controlling the middle and small solid blocky material in building material, mining, metallurgy industries etc. It is suitable to be used to control carrying ≤ 50mm material.

雙層棒條閥棒條閘門結構特點：

Structure characteristic:

采用優質型鋼焊接，結構簡單、易操作、無卡阻、剛性強、不變形、使用壽命長、基本無維修量。是中、小固體塊狀物料控制的理想設備。

The valve is welded in fine steel, having the features of simple structure, easy to operate, not obstructive high strength, no distortion, long life and no maintenance. It is the ideal equipment of controlling the middle and small solid block material.

雙層棒條閘門性能參數：

Performance parameter:

 雙層棒條閘門工作原理：

Working principle:

棒條閘門一般為常開型，物料處流通狀態。根據工況需要切斷或調節時 , 需逐個插入棒條，以阻止物料流通，也可根據工況需要通過調整棒條間的間隙來控制物料的大小。

The valve is the opening type. The material is in the state of circulation. When it needs to be cut off or adjusted according to the working condition, the grid stick must be inserted one by one to prevent the material from circulating. In order to control the size of the material, adjusting the clearance of the grid stick according to the working condition also can be adopted.

雙層棒條閘門使用說明：

Usage explanation

•  安裝時兩法蘭連接時必需加密封墊片，然后均勻鎖緊螺栓。

•  運行時不得對抽出的棒條進行猛烈撞擊，以免棒條變形無法復位。

•  切斷流通塊料時，必須從兩邊依次插入棒條。

•  若長期存放，不允許露天存放或堆置。

•  Add seal cushion between two flanges connection and screw down bolt

•  Prevent the grid drawn out from hard bumping in order to avoid distortion.

•  Insert the grid stick from both sides one by one when cut off passing block material.

•  When valve is long stored, it should not be placed or piled up in the open air.

單層外形圖：                                                    雙層外形圖：

Appearfigure:                                                                 Appearance figure:

工作原理

適用介質:50mm以下顆粒物料適用溫度:≤300℃棒條閘門結構簡單，易操作，無卡阻，能隨時調整通過物粒的大小(經調整能通過>50mm物料)。本閘門采用優質型鋼焊接，剛性強、使用壽命長、基本無維修量，是中小型晶狀、塊狀物料控制的理想設備。本閥是根據建材、選礦、冶金等行業對中小型固體塊狀物料的輸送、控制、篩選、給料等工藝的需要而研制的一種新型閘門，適用于≤50mm物料控制。

本公司專業生產鑄鐵鑲銅閘門，滑閥，不銹鋼閘門，礦漿閥，排泥閥，套筒閥，浮箱式拍門，渠道閘門，手電兩用啟閉機，疊梁閥，泄爆閥，泄壓閥，自閉式泄爆閥，均壓放散閥，廢氣閥，防爆閥，除塵放散閥，爐頂放散閥，壓力真空釋放閥，手動眼鏡閥，升降比例閥，三通分料閥，四通分料閥，側三通分料 閥，棒條閥，卸灰閥，雙向插板閥，，腭式閘門，葉輪給料機，星型卸灰閥，圓盤給料機，兩路分料閥，密閉式斜插板閥，平板閘門，扇形閘門，通風蝶閥，翻板式密封蝶閥，伸縮蝶閥，方形風門，圓形多葉蝶閥，刀閘閥，球閥等系列產品，歡迎各地新老客戶來電、來函、來人咨詢洽談！