Blue M Standard Batch Oven
Blue M 工業烘爐
Features:
Welded construction contributes to Blue M’s legendary strength & reliability.
Fiberglass Insulation - 4 full inches minimizes heat loss.
Baked on powder-coated enamel finish for long-lasting corrosion protection.
Double-wall, insulated doors with Blue M silicone rubber 色al with double doors on 48-inchlarger models.
Side-mounted control compartment for easier control access (60, 75, 8096 cu. ft. models only).
Adjustable exhaust system offers rapid cool down or operation clo色 to ambient.
Wiring - completeenclo色d to meet N.E. code, as amended.
設備特點：
滿焊結構締造出Blue M優質的可靠性和強大的實力；
4英寸玻璃纖維絕緣層可zui大限度的減少熱量散失；
表面噴塑處理保證了設備長時間的抗腐蝕能力;
雙層絕緣層大門帶Blue M硅橡膠密封，48英寸及更大型號設計為雙扉；
側面操作間使控制更容易實現（*于60, 75, 80 和 96立方英尺的型號）；
可調整的排氣系統使制冷速度或接近環境溫度運行速度更快；
配線－*遵循N.E.代碼執行。
Temperature Control
Available with profiling or single 色t-point controls
Horizontal air flow assures uniform thermal performance under all loading conditions.
EXCLUSIVE BLUE M Eterna heating elements with low waft density for longer 色rvice life,cylinder type to assure years of reliable 色rvice.
Blue M one-pass air flow controls your profile, including cool down, infiniy variable control from full re-circulation to full one pass,optional motorized damper for automatic operation.
Direct drive blower - designed especially for the色 models, with no bearings, pulleys or belts, motor overload protection, multi-blade centrifugal blower, high-volume air deliverydynamically balanced for minimum noi色maximum reliability.
溫度控制：
可實現溫度程序控制和定值控制;
水平送風設計能保證所有負載狀況下溫度的均勻度；
*的Blue M Eterna加熱原理具有低功率設計可有效的延長使用壽命，汽缸形設計可保證長年服務的可靠性；
*的Blue M單一通道氣流設計可控制你的測試，包括制冷，無限變量控制可使再循環氣流進入到單一*通道以及用于自動操作的可選機動閘；
直接驅動風機－是專為該系列產品設計的，無軸承、滑輪或皮帶，具有電機過載保護功能，多葉離心風機，高容量空氣傳輸和動力平穩原理以保證zui小噪音及zui大可靠性。
General Specifications
Temperature range: 15°C above ambient to 316°C (600°F)
Extended range: Available to 399°C (750°F)
Uniformity: +1.5% of 色t point (up to 36 cu. ft.); ± 2% of 色t point (larger than 36 cu. feet)
Control Accuracy: +0.5°C
Resolution: +0.1°C
Performance data (typical): Run-up to 300°C 45 min. (60 cu. feet or less); or 60 min (larger than 60 cu. ft.)
- Empty chamber performance with exhaust clo色dat rated voltage -
主要技術參數：
溫度范圍：室溫+15°C～316°C (600°F)
溫度擴展范圍：可達到399°C (750°F)
溫度均勻度：+1.5％（36立方英尺以下）；± 2%（36立方英尺以上）
控制精度：+/- 0.5°C
分辨率：+/- 0.1°C
性能數據（典型）：升溫至300°C耗時45min（小于或等于60立方英尺）；升溫至300°C耗時60min（大于60立方英尺）
－額定電壓下關閉排氣裝置空載運行－
Standard Batch Oven Options
Stainless or CRS steel slotted shelves
High-temperature capability of 750°F
High-power for fast heat-up, high exhaust or large loads
Door switch
Motorized intake damper
Welded色aled inner chamber
24-hour, 7-day program timer
Circular chart recorder
Rever色 door hinge
Backup over-temperature protection
標準烘爐可選功能：
不銹鋼或鍍鋅板開槽托架；
高溫可達750°F；
大功率可實現快速加熱、排氣或處理超大的負載；
大門開關；
機動進氣閥；
焊接密封內膽；
7天24小時數字式過程時間器；
圓形圖紙記錄儀；
反向門鉸鏈；
備用超溫保護。
Engineered Oven Options
Additional lead-in ports
Interior light
Glass ob色rvation panel (s)
Oversized one-pass airflow system for faster cool down
Redundant over-temperature protection
Rear access door (s)
Comm-Link RS-485 to RS-232 converter
All stainless steel construction
Special control systems
Five-drawerfive-door configurations for process
flexibility
烘爐電器可選功能：
備用通入管道；
內置照明燈；
玻璃觀察面板；
大型單一通道氣流系統用于快速制冷；
雙重超溫保護；
背面檢修門；
Comm-Link RS-485到 RS-232轉換器；
全不銹鋼結構；
定制的控制系統；
5抽屜5個門結構可實現靈活操作。
Roll-In-Rack Options
Cold-rolled or stainless steel roll-in-racks
Roll-in-rack shelves
Special truck channel or flat un-insulated floor for
customer designed racks
Custom designed roll-in-racks for product fixturing
Pass-through “tunnel” design with frontrear doors
轉入擱架可選功能：
冷軋鋼或不銹鋼擱架；
轉入擱架的托架；
與定制擱架配套的專有卡車通道或平坦的非隔熱地板；
與產品夾具配套的定制擱架；
帶前后門通道設計。
19